Select to expand quote
Taeyeony said..
From reading the review. I can sense the trend in the front wing design. Most newer wing realease recently tend to have pretty high aspect AR 8-10 but has the foil profile that ride bigger than its surface area implied.
Higher camber at the mid section made the lift more gradual and lower the stall speed so it start easier to use. And tthey have more twist in the wing tip so it turn better and more forgiving.
The tradeoff is the lower top speed which is totally fine IMO. The foil is more fun and easier to ride for most users for majority of their riding.
It's fun watching the development of foil design - I think there's a lot more to come. My impression is that the design of the earliest foils is almost primitive. That's possible because just about anything will allow you to foil up (I've foiled a bit with a front wing mounted upside down, although I cannot recommend that

).
The first foil iteration were low to medium aspect "fat" wave foils. They were followed by going towards high aspect foils, although those often had clear disadvantages. Now, the attention shifts to the profile - the new HAs are
very different from typical profiles, with a very pronounced concave towards the rear edge. This reminds me of similar (but much less pronounced) designs in high-end windsurfing fins. I think we'll see similar profiles pop up in other brands.
Board shape is similar - just about anything will work, and we are just starting to understand the advantages and draw-backs of different shapes, going past simplistic "hull speed" concepts. The interaction between board and foils shapes and different rider skills, preferences, and conditions is where things get really confusing. To illustrate: I went back to my very long, "super high swing weight" Stingray 140, to work on jibes, and paired it with an Axis HPS 1050 and FR 500 tail. This is a combination that better wingers would likely describe and "completely unusable", but for me, it worked much better than smaller boards, foils, and tail wings, for a variety of reasons. Ironically, I bought the smaller board because of frequent statements that smaller boards make jibing easier. In reality, it set me back several months. Once on the proper gear
for my skills and preferences, I made very rapid progress, getting to a 75% dry rate, with a decent amount of almost foiled through jibes (just a very short touchdown before or after foot switch) within a few sessions.
I realize that I'm definitely not a typical winger or learner, but I do know others who have had even more problems learning things that other wingers learned very quickly. Fortunately, there was some very good, specific advice out there that really helped me (e.g. "HPS not Spitfire for learning to jibe"). So it's great to see the posts here become more specific, and finally including some of the trade-offs and not-so-fantastic characteristics. The more information a post has about skills, conditions, preferences, detailed experiences, and limitations, the more useful it is. In particular, I believe that including the "negatives" helps even the brand in the long run. Sure, lots of one-sided hype may sell more foils in the short run, but people disappointed with these hyped products are more likely to switch to other brands, so it's a loss in the long run.