Select to expand quote
RichardG said..
Thats a good question. I would add the following:
Also how many people buying these Naish boards/ foils have tried using foils on say their older 130 litre Slalom board of around 82 cm wide ?
What width is the Naish 122 Hover board ?
What length of foil mast can you learn with ?
Can you learn on a long foil mast ?
There is going to be a lot of people go and use their old slalom boards and get out there. A few things you're going to find;
- The tail is not wide enough and you'll have trouble controlling the foil lift.
- The board is not strong enough (if using a DT box) and you'll eventually rip the box out or fold your board at the front of the mast mount.
- The angle of the foil will be out, and you'll be sailing along with your board pointing into space, and all that rocker making it worse. The faster you go the more windage you will encounter, making everything harder.
The loads a foil board goes under are insane, when I I think about the Hover 122 lifting my 95kg ass up whilst I'm pumping on a 5.3m with totally ease (actually lift to spare), there must be an enormous amount of sheer loading at the front of the mast mount. Naish Hover boards all run serious reinforcements way in front of their foil mounts to ensure the load is distributed efficiently without overloading the board. The construction is almost bullet proof. Grabbing your old sailboard which was not designed to take these loads, actually most slalom boards were designed to be somewhat light everywhere on the bottom except the fin box (which was only really reinforced for side to side loads), will eventually give way.
Using a Foil Mount sick on pad is great as it does spread the load quite well, but again, your board was not designed to withstand these loads, and most importantly the bottom laminate which is now taking all the load. It's a great product, and good to get you on the water fast to experience foiling while you are waiting for your Hover to turn up

. But Please be weary, and please please please tether your foil to your board securely. We've been using the Foil Mount from ZU on our 5'6" Raptor Soft Top (prone surfboard) for about a month or so now, and it's been great. We do still tether the foil every time though.
Width - DJ had this one, 73cm You don't need to go super wide, as the foil is doing all the lifting. Going to wide increases drag and windage. What you're going to find with foiling is once you have enough skill, you want to have the smallest board you can get away with while still being efficient. I used an old Kite Race board, 190 x 69 @ 95ltrs, and attached the Malolo Foil to it and my 4.7m Force, it felt amazing. If I hadn't creased it (as per my comments above), I'd likley still be using it when windy enough (I can't uphaul it, so needs to be water start conditions). The Hover 122 is right on the mark. It's just big enough to uphaul easily, gets going amazingly early, and is super well balanced.
Personally my first session was on a 52cm mast. It worked fine, but didn't give you much play area. If you're on dead flat water, you can go short, but in chop you'll be checking in a lot or breeching. The Thrust WS comes standard with a 70cm mast, and works really well. It's not intimidating and easy to control.
Learning to foil on a long mast is possible, but you have to be ready for some mean stacks. Imagine yourself like a pendulum swinging over your foil, everything on a longer mast is intensified. I do believe the longer mast will be used for racing and working with larger sails at higher speeds, but it's kind of like formula sailing, you've got to know your stuff, where as Naish' set up is actually super easy. I put 3 time Olympic Windsurfer Lars Kleppich on the Hover on this day (Pics coming) and he picked it up immediately, getting decent glides. Lars had 2 goes behind the board 3 days earlier, then straight into it. Now yes he's an experienced sailor, but I believe the gear helped a ton (and my expert tuition

).
This is a massive answer, and I hope it helps a little.
Be safe,
JB