Back to top

What did you do to your sailing boat today ?

Created by Boatin Boatin  > 9 months ago, 12 Jun 2013
Register to post, see what you've read, and subscribe to topics.
cazou34
cazou34

NSW

146 posts

19 Oct 2018 9:17pm
Select to expand quote
Bananabender said..
Went went down to boat to install new vhf radio,aerial, aerial base and cable. Simple job turned into bloody frustration.
Needed to enlarge hole for new cable through transom. Using new Ryobi cordless tightened bit normal way drilled hole slightly small and was reaming edges when the bit fell out into transom . Could see it but out of reach . Thirty minutes to retrieve with borrowed garden rake.
There was an extra red wire coming out of terminal at switchboard for old vhf which disappeared between internal liner and hull. Looked like It was heading to mast so thought I'd better find out what it's doing . One hour later discovered it went nowhere. In the process of crawling around ripped open leg on sharp fibreglass edge , on blood thinners so blood everywhere . Radio operational ,next week reroute depthsounder cable . More holes to drill. Love it.


sounds like me when I'm trying to fix something on the boat, always finish in drama. Last time I went completely mad about my geni and threw it overboard. After a bit of argument, my gf convinced me to go find it in muddy -13m ...
southace
southace

SA

4794 posts

19 Oct 2018 9:01pm
Select to expand quote
cazou34 said..

Bananabender said..
Went went down to boat to install new vhf radio,aerial, aerial base and cable. Simple job turned into bloody frustration.
Needed to enlarge hole for new cable through transom. Using new Ryobi cordless tightened bit normal way drilled hole slightly small and was reaming edges when the bit fell out into transom . Could see it but out of reach . Thirty minutes to retrieve with borrowed garden rake.
There was an extra red wire coming out of terminal at switchboard for old vhf which disappeared between internal liner and hull. Looked like It was heading to mast so thought I'd better find out what it's doing . One hour later discovered it went nowhere. In the process of crawling around ripped open leg on sharp fibreglass edge , on blood thinners so blood everywhere . Radio operational ,next week reroute depthsounder cable . More holes to drill. Love it.



sounds like me when I'm trying to fix something on the boat, always finish in drama. Last time I went completely mad about my geni and threw it overboard. After a bit of argument, my gf convinced me to go find it in muddy -13m ...


Should of thrown the girlfriend over and kept the generator. Hope it wasn't a Honda!
Planeray
Planeray

NSW

217 posts

22 Oct 2018 1:43pm
Finally finished off my topside with Kiwigrip today!

Here's an album of the whole thing: imgur.com/a/04EWOB5
shaggybaxter
shaggybaxter

QLD

2661 posts

22 Oct 2018 1:06pm
Select to expand quote
Bananabender said..
Went went down to boat to install new vhf radio,aerial, aerial base and cable. Simple job turned into bloody frustration.
Needed to enlarge hole for new cable through transom. Using new Ryobi cordless tightened bit normal way drilled hole slightly small and was reaming edges when the bit fell out into transom . Could see it but out of reach . Thirty minutes to retrieve with borrowed garden rake.
There was an extra red wire coming out of terminal at switchboard for old vhf which disappeared between internal liner and hull. Looked like It was heading to mast so thought I'd better find out what it's doing . One hour later discovered it went nowhere. In the process of crawling around ripped open leg on sharp fibreglass edge , on blood thinners so blood everywhere . Radio operational ,next week reroute depthsounder cable . More holes to drill. Love it.


Thanks BB, I needed a laugh!
I am sure boats have personalities, and one of their moods is sulking. Or just downright pissed at you for not sailing them enough, so they give you a slap to remind you.
A sneaky cat biting an ankle springs to mind.
Laughing with ya buddy, not at you of course.....
Bananabender
Bananabender

QLD

1610 posts

22 Oct 2018 2:49pm
Select to expand quote
shaggybaxter said..

Bananabender said..
Went went down to boat to install new vhf radio,aerial, aerial base and cable. Simple job turned into bloody frustration.
Needed to enlarge hole for new cable through transom. Using new Ryobi cordless tightened bit normal way drilled hole slightly small and was reaming edges when the bit fell out into transom . Could see it but out of reach . Thirty minutes to retrieve with borrowed garden rake.
There was an extra red wire coming out of terminal at switchboard for old vhf which disappeared between internal liner and hull. Looked like It was heading to mast so thought I'd better find out what it's doing . One hour later discovered it went nowhere. In the process of crawling around ripped open leg on sharp fibreglass edge , on blood thinners so blood everywhere . Radio operational ,next week reroute depthsounder cable . More holes to drill. Love it.



Thanks BB, I needed a laugh!
I am sure boats have personalities, and one of their moods is sulking. Or just downright pissed at you for not sailing them enough, so they give you a slap to remind you.
A sneaky cat biting an ankle springs to mind.
Laughing with ya buddy, not at you of course.....


Hey SB are you some kind of bloody psychic.
Its been five weeks as cardiologist banned me from solo sailing until
next week . So what's going to happen to me when I go down tomorrow to reroute depth cable .
samsturdy
samsturdy

NSW

1659 posts

22 Oct 2018 3:56pm
Select to expand quote
Bananabender said..

shaggybaxter said..


Bananabender said..
Went went down to boat to install new vhf radio,aerial, aerial base and cable. Simple job turned into bloody frustration.
Needed to enlarge hole for new cable through transom. Using new Ryobi cordless tightened bit normal way drilled hole slightly small and was reaming edges when the bit fell out into transom . Could see it but out of reach . Thirty minutes to retrieve with borrowed garden rake.
There was an extra red wire coming out of terminal at switchboard for old vhf which disappeared between internal liner and hull. Looked like It was heading to mast so thought I'd better find out what it's doing . One hour later discovered it went nowhere. In the process of crawling around ripped open leg on sharp fibreglass edge , on blood thinners so blood everywhere . Radio operational ,next week reroute depthsounder cable . More holes to drill. Love it.




Thanks BB, I needed a laugh!
I am sure boats have personalities, and one of their moods is sulking. Or just downright pissed at you for not sailing them enough, so they give you a slap to remind you.
A sneaky cat biting an ankle springs to mind.
Laughing with ya buddy, not at you of course.....



Hey SB are you some kind of bloody psychic.
Its been five weeks as cardiologist banned me from solo sailing until
next week . So what's going to happen to me when I go down tomorrow to reroute depth cable .


In a couple of years time we'll find your skeleton in the bilge
Seebreasy73
Seebreasy73

QLD

334 posts

22 Oct 2018 3:28pm
I am debating if it is worth repainting the mast or not, what do you recon?
Lazzz
Lazzz

NSW

910 posts

22 Oct 2018 5:28pm
Select to expand quote
Planeray said..
Finally finished off my topside with Kiwigrip today!

Here's an album of the whole thing: imgur.com/a/04EWOB5


Gotta be happy with that!!
Ramona
Ramona

NSW

7737 posts

22 Oct 2018 5:47pm
Select to expand quote
Planeray said..
Finally finished off my topside with Kiwigrip today!

Here's an album of the whole thing: imgur.com/a/04EWOB5


Good job.
SandS
SandS

VIC

5904 posts

22 Oct 2018 6:52pm
Select to expand quote
Planeray said..
Finally finished off my topside with Kiwigrip today!

Here's an album of the whole thing: imgur.com/a/04EWOB5


looks good ..... did that have a texture grip finish built in to the gelcoat to start with ?
garymalmgren
garymalmgren

1365 posts

22 Oct 2018 4:32pm
Seabreezy.
NO!
Just keep that nice worn in look.
Lot less work and can' t get much worse.

Gary
Planeray
Planeray

NSW

217 posts

22 Oct 2018 9:11pm
Select to expand quote
SandS said..

Planeray said..
Finally finished off my topside with Kiwigrip today!

Here's an album of the whole thing: imgur.com/a/04EWOB5



looks good ..... did that have a texture grip finish built in to the gelcoat to start with ?


Only in as much there was a heap of dings in the deck .

But with how thick it is, it probably wouldn't take much sanding to cover up non slip.
Bananabender
Bananabender

QLD

1610 posts

23 Oct 2018 4:43pm
Finished the jobs I went down to do ,didn't finish the jobs I created today such as replaced cabin light now it doesn't go .
Your fault SB
Stuff it no more jobs this year just sailing.
shaggybaxter
shaggybaxter

QLD

2661 posts

23 Oct 2018 5:34pm
Select to expand quote
Bananabender said..
Finished the jobs I went down to do ,didn't finish the jobs I created today such as replaced cabin light now it doesn't go .
Your fault SB
Stuff it no more jobs this year just sailing.


southace
southace

SA

4794 posts

23 Oct 2018 6:41pm
The Perkins M60 motor on Icon has had a air in fuel leak since day one that's been causing it to bleed back and making it hard to start and run smooth.
Today I replaced the old primary filter which was down near the gearbox and hard to access with new fuel system including a Primer bulb, I have sorted the problem now she starts first turn of the key like a champ! I love boats! ??



woko
woko

NSW

1770 posts

23 Oct 2018 8:31pm
SA, Looks like you have used quality parts, I used a primer bulb from bcf on a bobcat and it went hard, in a bad way !
hows the painting going ?
southace
southace

SA

4794 posts

23 Oct 2018 8:32pm
Select to expand quote
woko said..
SA, Looks like you have used quality parts, I used a primer bulb from bcf on a bobcat and it went hard, in a bad way !
hows the painting going ?



The primer bulb got added at the last minute as I couldn't get the fuel iinto the Cav bowl with the Perkins crappy lift pump!
Painting starts again tomorow again if I don't have to work. Going to try nd re-tint the paint so it's not so bright!
southace
southace

SA

4794 posts

23 Oct 2018 8:53pm
I re-fitted the clock and barometer the roof is going to be a bitch to paint but will get it done. Would like to have stainless/chrome plated clock and barometer to finish it off but Can't afford its now.similar to my last re- fit ,
this one is going to be bigger and better than by last re-fit I'm hoping!'

I
stupid
stupid

QLD

211 posts

24 Oct 2018 7:20pm
Today I made more inroads into making opening hatch type windows for the front half of my boat .
the benefits of more airflow in the tropics is inducive to major efforts/comfort gains.
they will be a smaller version of this style with different opening direction.




cisco
cisco

QLD

12364 posts

24 Oct 2018 11:29pm
Those double side windows look flash mate and like you say, just the shot for catching cooling breezes in FNQ.
Where did you score them and how much??
cisco
cisco

QLD

12364 posts

25 Oct 2018 1:13am
Today I drilled 9 holes in my boat to run the paddle wheel transducer cable from the fox hole to the cock pit and ended up with a bit of slack at the end of it and a bit of a suck to clean up the mess.

It was a decidedly sexual experience I can tell you.
stupid
stupid

QLD

211 posts

25 Oct 2018 6:22am
Select to expand quote
cisco said..
Those double side windows look flash mate and like you say, just the shot for catching cooling breezes in FNQ.
Where did you score them and how much??


I had the frames made in Weipa, put them together when I got back to Brisbane.
they were not cheap!
yet still cheaper than slim line hatches which would not have worked as well, due to space constraints.
Wander66
Wander66

QLD

294 posts

25 Oct 2018 6:50am
Select to expand quote
stupid said..

cisco said..
Those double side windows look flash mate and like you say, just the shot for catching cooling breezes in FNQ.
Where did you score them and how much??



I had the frames made in Weipa, put them together when I got back to Brisbane.
they were not cheap!
yet still cheaper than slim line hatches which would not have worked as well, due to space constraints.


The only thing that's cheap in Weipa are the insults
Wander66
Wander66

QLD

294 posts

25 Oct 2018 6:50am
Select to expand quote
stupid said..

cisco said..
Those double side windows look flash mate and like you say, just the shot for catching cooling breezes in FNQ.
Where did you score them and how much??



I had the frames made in Weipa, put them together when I got back to Brisbane.
they were not cheap!
yet still cheaper than slim line hatches which would not have worked as well, due to space constraints.


The only thing that's cheap in Weipa are the insults
southace
southace

SA

4794 posts

25 Oct 2018 8:01pm
I toned the white down and gave it a green tinge.
Im very happy with the finish and will now continue with the roof , port bulkhead and a few other bits!
Not bad for a weekend warrior!
I love boats!


J








SandS
SandS

VIC

5904 posts

25 Oct 2018 8:43pm
Select to expand quote
southace said..
I toned the white down and gave it a green tinge.
Im very happy with the finish and will now continue with the roof , port bulkhead and a few other bits!
Not bad for a weekend warrior!
I love boats!


J









so, i see a theme here some thin white paint ,to match the "thin white duke"
southace
southace

SA

4794 posts

25 Oct 2018 8:28pm
It's a water based wattle brand no smell at all, perfect system for below decks.
cisco
cisco

QLD

12364 posts

28 Oct 2018 11:26pm
What did I do to my sail boat tyoday?

I hung my Garmin 75 dv and GME GX 700 off the deckhead over the nerve centre and ran their various wires in the direction they need to go.
Not live yet. That is tomorrow's challenge.







twodogs1969
twodogs1969

NSW

1000 posts

30 Oct 2018 4:19pm
Vanishing and slipping








southace
southace

SA

4794 posts

30 Oct 2018 7:58pm
Port side done! Next the roof and then the varnish/bright work , shipwright is fitting forward cabin door and galley/garage bi-fold door! I love boats!



Loading more posts...
Please Register, or first...
Topics Subscribe Reply

Return To Classic site