Back to top

GT-31 - SD Card Locked

Created by paddymac paddymac  > 9 months ago, 26 Dec 2011
Register to post, see what you've read, and subscribe to topics.
paddymac
paddymac

WA

941 posts

26 Dec 2011 9:47pm
My GT-31 is now seeing my SD card as locked. The card has been fine for the last nn sessions. I tried writing to it one the computer and it worked fine. I've tested another card, it sees that as locked too. Anyone had this issue?
scarrgo
scarrgo

WA

193 posts

27 Dec 2011 12:02am
hmmm i seem to remember having this problem a while back but can't remember what it was, it was somthing small, i think it was just like some salt on the card or it wasn't in properly
Herbylyn
Herbylyn

QLD

214 posts

27 Dec 2011 9:12am
Maybe it IS locked. Have you looked at the little slider switch on card?
paddymac
paddymac

WA

941 posts

27 Dec 2011 10:13am
Select to expand quote
Herbylyn said...

Maybe it IS locked. Have you looked at the little slider switch on card?


I have ensured it is not locked by writing to it on the computer. I have also tested another card (unlocked) which also shows as locked.
choco
choco

SA

4177 posts

27 Dec 2011 3:18pm
Select to expand quote
paddymac said...

Herbylyn said...

Maybe it IS locked. Have you looked at the little slider switch on card?


I have ensured it is not locked by writing to it on the computer. I have also tested another card (unlocked) which also shows as locked.


hmm might have to ring a locksmith
paddymac
paddymac

WA

941 posts

27 Dec 2011 1:36pm
Select to expand quote
choco said...

paddymac said...

Herbylyn said...

Maybe it IS locked. Have you looked at the little slider switch on card?


I have ensured it is not locked by writing to it on the computer. I have also tested another card (unlocked) which also shows as locked.


hmm might have to ring a locksmith





I've already tried this guy
Windxtasy
Windxtasy

WA

4017 posts

28 Dec 2011 11:00am
Is it the GT 31 which is locked?
I inadvertently locked my GT11 last week and I couldn't even turn it off!
nebbian
nebbian

WA

6277 posts

28 Dec 2011 11:06am
It's almost certainly the little sensor that detects the position of the card slider.

That sensor is buried deep within your GT-31, you'll have to pull it to bits to get to it.

Good luck
bearhoover
bearhoover

TAS

708 posts

28 Dec 2011 9:50pm
I am having the same problem. Can be very frustrating when your waiting to hit the water.

I have had an improvement by blowing out with compressed air and updating the software seems to have helped but occasionally it still has to be re inserted 2 or 3 times before it works so if you find a solution I would be very interested!
End of posts
Please Register, or first...
Topics Subscribe Reply

Return To Classic site