Outdoors Board Rack - Ideas

9 years ago
Reply
Register to post, see what you've read, and subscribe to topics.
Obelix
Obelix
WA
1171 posts
WA, 1171 posts
21 Dec 2016 9:30am
Hi,

Currently my stuff is piled up on my dinghy, under the carport, but is exposed to afternoon sun.
I have some space along the fence and could build a storage - and could benefit from other people's ideas and experiences.

Requirements:
Space for 4 boards
6 sails
3 masts
A box with smaller parts (50x80cm?)
width 80cm
length 280-300cm
Needs to be protected from the top, back and sides. Some practical front coverage

Your ideas on the design and materials would be very much appreciated.
Shifu
Shifu
QLD
1997 posts
QLD, 1997 posts
21 Dec 2016 11:55am
Put a side on the carport.
bowsa
bowsa
QLD
629 posts
QLD, 629 posts
21 Dec 2016 12:25pm
Interesting to see someone with the same dilemma as me! I have an awkward property on a very steep slope with limited space. Am currently building a shed out of an old shed elsewhere on the property. New frame is up but it's not quite done yet - still needs to be clad in colourbond. Shed sit off the ground and anchored to hardwood screen posts and off sloping concrete slab. Dimensions are 0.7x2x2.7m so will hold boards, sails etc plus other tools and general things like whipper snippet n stuff
All bolted together with 10mm bolts no welding - have kind of made it up as I go but it looks the goods!



AUS 808
AUS 808
WA
516 posts
WA, 516 posts
21 Dec 2016 10:32am
WOW, that is steep
Shifu
Shifu
QLD
1997 posts
QLD, 1997 posts
21 Dec 2016 1:09pm
Maybe add some sort of insulation under the roof at least. Tin sheds get very hot... little ones probably more so.
Scoob
Scoob
WA
88 posts
WA, 88 posts
21 Dec 2016 11:23am
Try a van (?).
Obelix
Obelix
WA
1171 posts
WA, 1171 posts
21 Dec 2016 11:46am
>>>Put a side on the carport
It would help to protect the area from the elements I guess. But will require shire approval.

A small shed is not bad idea. Maybe there is something readily available - 3m long - 1m deep - then add shelving.
I don't think I'm up to building a shed like Bowsa.

A van would be nice but too expensive of an option

Not being a carpenter, may need some ideas on how to create the shelving.

Thanks guys, looking forward to more advice.
mineral1
mineral1
WA
4564 posts
WA, 4564 posts
21 Dec 2016 11:52am
Obelix said..
>>>Put a side on the carport
It would help to protect the area from the elements I guess. But will require shire approval.

A small shed is not bad idea. Maybe there is something readily available - 3m long - 1m deep - then add shelving.
I don't think I'm up to building a shed like Bowsa.

A van would be nice but too expensive of an option

Not being a carpenter, may need some ideas on how to create the shelving.

Thanks guys, looking forward to more advice.


Obelix, a small shed is fine, plenty of 2nd hand jobs about. or just a lean to attached to the fence. To keep it cool as I did with my trailer, I purchased a stack of off cut insulation and liquid nail glued to the inside of the trailer. Works a treat and the interior is relatively cool compared to what it used to be.
Mark _australia
Mark _australia
WA
23647 posts
WA, 23647 posts
21 Dec 2016 12:58pm
Obelix said..
>>>Put a side on the carport
It would help to protect the area from the elements I guess. But will require shire approval.

A small shed is not bad idea. Maybe there is something readily available - 3m long - 1m deep - then add shelving.
I don't think I'm up to building a shed like Bowsa.

A van would be nice but too expensive of an option

Not being a carpenter, may need some ideas on how to create the shelving.

Thanks guys, looking forward to more advice.


There are small "under eaves" sheds like that.
Trouble is as mentioned they get mega hot. I would insulate the shed and put a little roof about a foot higher than the shed so it is in the shade

Hmm now thinking - often the tip has coolroom panels thrown out, could build something with that......
Tardy
Tardy
5337 posts
5337 posts
21 Dec 2016 3:31pm
Hey Obelix . Every thought of a trailer ?
It's a potable shed ,you never have to unload your gear again just unhook .
Just wash wet suit and done ..
Obelix
Obelix
WA
1171 posts
WA, 1171 posts
21 Dec 2016 5:57pm
Trailer would be nice, but in a way, similar to a van.
Such a trailer would be quite expensive to buy/build. then would cost money to maintain, etc.

A S/H shed would be under $300, then wood (or other stuff) for shelving. Hopefully under $500 in total.
And yes, will require insulation.

Build a wooden shed?
Tardy
Tardy
5337 posts
5337 posts
21 Dec 2016 6:05pm
wood is good.and you can do it yourself.
joe windsurf
joe windsurf
1482 posts
1482 posts
21 Dec 2016 6:57pm
here the issue is the cold
so, stuff gets stored inside most of the year
however, this means we have temporary covers for snow
NOT sure such a thing is available in your neck of the woods
there are MANY sizes and configurations ...
could always make a homemade version ??

www.google.ca/webhp
q=tempo&espv=2&biw=1536&bih=736&source=lnms&tbm=isch&sa=X&ved=0ahUKEwjcy46ej4XRAhWK5SYKHaO9CQgQ_AUIBigB#tbm=isch&q=abris+tempo




Obelix
Obelix
WA
1171 posts
WA, 1171 posts
21 Dec 2016 9:31pm

Thanks Joe,

As per the photo, this would probably be blown away across the backyard.
But contributes towards the final design, as I could use canvas as a front cover.
ballast
ballast
QLD
501 posts
QLD, 501 posts
22 Dec 2016 7:11am
Two pieces of 2 *4 on about a 20deg angle bolted to the fence posts. Put them on the inside as I think the posts were 2.4 apart from memory.

Then drill holes to suit what ever dowel you can find at about 250mm centres, square to the 4*2. This puts the board on an angle to counter a bit of flex in the dowel. I used pine rake handles as a complete rake was considerably cheaper than the same length piece of pine dowel at the time (go figure).
You can get Oak dowel, if you want it a bit stronger.

Some hensilite or tin for a roof on a timber frame, also bolted to the fence with shelf angle brackets with some timber battens and shade cloth hanging off that to keep the sun off the sides. Chuck on some pipe insulation on the dowels if needed.

The struts take most of the load off the fence, so it shouldn't fall over, and is quick to remove if you have to move it.
blazing928
blazing928
VIC
106 posts
VIC, 106 posts
22 Dec 2016 8:56am
On eBay there are 2m x 700 wide sheds. I'm thinking of buying two & joining them together to store 3.8m race boards.
Plenty of options especially around the 2.4m length. Search garden sheds.
Coolite foam can be purchased from art stores too.
A "safari" roof on top, like the old Land Rovers, or paint roof white/ silver, add a whirly vent
Obelix
Obelix
WA
1171 posts
WA, 1171 posts
22 Dec 2016 7:17am

Hi Ballast, Unfortunately, don't have a fence with posts. Still some good ideas for the shelving. Thanks.

Hi Blazing,
Only looked at Gumtree so far, and wasn't impressed by the prices.
But a 3mx1.5m on eBay can be purchased for $300 + $100 delivery. Then I need to make shelving. I'll have a better look. Some even provide shelving.




So sheds are an option. Will need to open the front - remove the doors and at least one panel in front - so the boards can be easily extracted.
Also - not sure what's expected to be under the shed - a concrete slab? Or can it be bolted to the paving.

A wooden shed is still bugging me, as it can be created to the dimensions which suit the space.




Obelix
Obelix
WA
1171 posts
WA, 1171 posts
22 Dec 2016 7:22am
Could be another 20cm long, and 20cm lower. Then to remove the front completely. An ugly looking thing though.

shaggy696
shaggy696
WA
78 posts
WA, 78 posts
22 Dec 2016 8:17am
Hey Obleix,

I have some tin roofing sheet I took down from an old shed. I used some of it to build a section on the end of my carport for storage of boards etc but plenty remaining if you want it. Probably about 28m worth in total so you could use for sides also.
Shifu
Shifu
QLD
1997 posts
QLD, 1997 posts
22 Dec 2016 11:14am
Throw a cover over the dinghy and boards to keep the sun off. Or, build a special rack in the carport for you boards and make a neat cover with well though out tie downs to keep the element and dirt off. Here's mine rack when I kept my stuff in a carport. I eventually threaded a stainless steel cable through all the footstraps and locked it as a deterrent to the casual theif.







Obelix
Obelix
WA
1171 posts
WA, 1171 posts
22 Dec 2016 1:19pm

Hi Shifu, the shelving is interesting.

I like how it is self supporting. Did you make it yourself or bought it from somewhere?
Obelix
Obelix
WA
1171 posts
WA, 1171 posts
22 Dec 2016 1:23pm

Shaggy thanks, appreciate this.
Not sure which way I'll do this. Definitely like the Shifu's shelving - and will use it as a sample. Possibly a bit less space between the slots.

I think I understand the options I have - now it needs to satisfy the building approvals commission (my wife) who needs to approve the design.

Not to mention that I'll actually ask her to build it for me
Shifu
Shifu
QLD
1997 posts
QLD, 1997 posts
22 Dec 2016 8:35pm
Obelix said..

Hi Shifu, the shelving is interesting.

I like how it is self supporting. Did you make it yourself or bought it from somewhere?



It's home made. These pics will explain the structure. I like to make these free-standing as I often seem to be moving house.






Obelix
Obelix
WA
1171 posts
WA, 1171 posts
23 Dec 2016 10:44am
Great photos Shifu. Thanks for that.
May start with the rack, then build around
Magic Ride
Magic Ride
719 posts
719 posts
23 Dec 2016 11:57am
I



Here's mine! It just hangs their waiting to be ridden.
Tardy
Tardy
5337 posts
5337 posts
23 Dec 2016 1:28pm



Obelix .these are just 6$ book case shelf stands with a 4" x1 pellet wood ,600 ml piece of pine .beauty of these ,you can put them anywhere ,eg above windows .silicon or glue a piece of carpet on top ....done . I have them everywhere .
Obelix
Obelix
WA
1171 posts
WA, 1171 posts
23 Dec 2016 1:44pm
Really quite simple. Thanks Tardy.
Unfortunately I don't have the back wall to fasten the L profiles to.

I guess it could be fastened to a metal shed if I put one in.

Magic Ride - nice, but need to hand another 3 somewhere, and sails, masts.

I's getting very close
Tardy
Tardy
5337 posts
5337 posts
23 Dec 2016 1:53pm
Obelix said..
Really quite simple. Thanks Tardy.
Unfortunately I don't have the back wall to fasten the L profiles to.

I guess it could be fastened to a metal shed if I put one in.

Magic Ride - nice, but need to hand another 3 somewhere, and sails, masts.

I's getting very close


No worries ,just ideas for you when you get the shed built ,you can screw a piece of ply to them too for your sails ,that way you have a complete shelf ,rather than just 2 areas holding your sails up .if a small lip is built too you can put extensions and other things on too .
good luck building ,and enjoy .
Imax1
Imax1
QLD
4937 posts
QLD, 4937 posts
23 Dec 2016 10:00pm
Shifu said..
Throw a cover over the dinghy and boards to keep the sun off. Or, build a special rack in the carport for you boards and make a neat cover with well though out tie downs to keep the element and dirt off. Here's mine rack when I kept my stuff in a carport. I eventually threaded a stainless steel cable through all the footstraps and locked it as a deterrent to the casual theif.









Nice rack Shifu
Whats the thing in the crate , is it alive ?
Shifu
Shifu
QLD
1997 posts
QLD, 1997 posts
23 Dec 2016 10:07pm
Kraken.



Microfibre car wash mit...
Imax1
Imax1
QLD
4937 posts
QLD, 4937 posts
23 Dec 2016 10:08pm
Please Register, or first...
Topics Subscribe Reply

Return To Classic site 😭
Or... let us know if a problem, so we can tweak! 😅