Just wondering if anyone knows if it is possible to cut a red Axis Aluminum Mast and then just re insert / tap threads etc., does the solid aluminum go all the way thru the mast? with just the center that is hollow?;-) thanks:-)

Can't speak to Axis. But a couple years ago I took bent aluminum Takuma and F-One masts to a friend who cut them below the bend and retapped them. Seemed to be no trouble for him. Those masts are still in service today.

Yes you can how much do you want to cut off . If you end up cutting off the rubber inserts you can push them back out and try to press in to make waterproof again or just seal with Sika flex . Re tap the threads with a M8 . Cutting the top is generally easier .

Select to expand quote

Piros said..
Yes you can how much do you want to cut off . If you end up cutting off the rubber inserts you can push them back out and try to press in to make waterproof again or just seal with Sika flex . Re tap the threads with a M8 . Cutting the top is generally easier .

Yeah I thought so thanks Rob:-)

Yes you can.
I chopped 60mm and retapped and sealed.

Has anyone successfully sealed the ali mast to base plate, or just the mast to prevent water getting in.. my 75cm is water tight, but just bought a 82 iand it's not. I'm happy to Permanently fuse it to base plate if that works? Any how to videos or old threads would be greatly appreciated!