hilly forum posts in last 60 days

Show Edits
Reply in Topic: Newbie lubie
hilly
hilly
WA
8120 posts
WA, 8120 posts
17 May 2026 7:58am
Carbon foil nothing. Ali foil Tef Gel.
Reply in Topic: Recessed deck design
hilly
hilly
WA
8120 posts
WA, 8120 posts
16 May 2026 2:04pm
TooMuchEpoxy said..
I’ve got a lot of these features on my cabrinha swift and I hate all of them. Wave piercing nose splashes water into the receded deck and I’ve got 10 lbs of water in the deck when I’m trying to get in foil and more splashes in as fast as it drains. Also all the volume in the domes is USELESS


Haha unlike you to not like the gear you buy ??
hilly
hilly
WA
8120 posts
WA, 8120 posts
15 May 2026 7:08am
CH3MTR4IL5 said..

robbo1111 said..


CH3MTR4IL5 said..



hilly said..












Interesting, mine's even closer to the tail, it's 240mm for same measurement. Can you measure the top to the edge of the deck grip?




Mine is 300mm (tracks) and 270mm (rear of deck pad to back of the board)



300 to the deck pad for me. Seems a bit of a mixed bag


Mine is 400mm so actually pretty consistent. Longer boards have the mast tracks further forward and the deck pad further forward. Slight variation is with the location of the deck grip on the hump. Mine is not fully up the hump so the 50mm difference between mast track and deck pad (350/400) should be closer to 30mm like yours.
hilly
hilly
WA
8120 posts
WA, 8120 posts
13 May 2026 8:55am







Reply in Topic: The Funny Images Thread
hilly
hilly
WA
8120 posts
WA, 8120 posts
12 May 2026 7:35pm



Reply in Topic: Recessed deck design
hilly
hilly
WA
8120 posts
WA, 8120 posts
12 May 2026 5:46pm
Mark _australia said..
I really don't know that people are feeling what they think they are. We went from 3" thick and wide wingboards to 6" thick DW and it takes off early yes - but never heard anyone whine about thickness. They got so narrow they needed thickness.... still no whinges about the thickness. When we settled on 75cm ish mast I have not heard anyone say that an 80 completely ruins foiling for them
Olympic classes are on a 100-105 mast..... if you had to truly feel so connected to the foil, don't you think the guys spending $30K on gear and living the sport every second of their lives in the hope of being a medallist - would be wanting to be more connected too? Kite race foil have gone from boards that look like a coffee table to skinny ML boards too. Thick ones. The best kite foil racer is see is on a very thick 19" wide ML.

Do what feels right for you, and all for innovation but some of this 20mm closer to the foil thing is a little silly. IMHO. Emperor's New Clothes ......



Think it is more for turning on waves or swell. My Smik the Jack turns nicely on swell and waves with a recessed deck. Love the Ducati design above looks cool.
Reply in Topic: capping immigration etc
hilly
hilly
WA
8120 posts
WA, 8120 posts
10 May 2026 9:11am
How do I qualify to immigrate to Australia?
Prospective applicants must be invited by the Australian Immigration Department to apply for the visa. Applicants wishing to emigrate to Australia on the Skilled Migrant Visa must have an occupation listed on the Medium and Long-term Strategic Skills List (MLTSSL) or Short-term Skilled Occupation List (STSOL).
hilly
hilly
WA
8120 posts
WA, 8120 posts
10 May 2026 6:54am
CH3MTR4IL5 said..

eppo said..
yeh when i rode it was near the middle - could have gone back a smidge. I know someone who has one and has it about middle - armie riders. Each to their own i suppose. It does have some front foot pressure lift but that's a function of the flat mast box - whilst armie boards have built in rocker. Chemtrails you tried a mast shim - that's what JL used on his. and it could be more sensitive on that 5'4



If i had mine in the middle of the track my rear foot would be on top of my stab. It is just not in the right place on mine.


You got a photo of it. If it is a factory error Scotty may replace it.
Reply in Topic: capping immigration etc
hilly
hilly
WA
8120 posts
WA, 8120 posts
9 May 2026 1:31pm
cammd said..


Mark _australia said..
Ok I wanna know why we never needed immigration to fill some jobs decades ago.




Because we kill about 80000 Aussie kids every year through abortion.



Oh dear. Really Raped by your uncle you have to keep the child to stop asians coming into the country
Reply in Topic: capping immigration etc
hilly
hilly
WA
8120 posts
WA, 8120 posts
9 May 2026 1:29pm
Mark _australia said..
Ok I wanna know why we never needed immigration to fill some jobs decades ago. Smart kids became doctors and stuff. Some of them made coffee or flipped burgers while at uni. Dumb kids dig holes at 14 and never went to uni. We had a full spectrum.
are aussies now too good so we need servants? If we cut immigration greatly and cut welfare would more Aussies go get the service industry jobs? I dunno just musings but it seems weird everything worked well right up to the last 20-30yrs..?


Aussies are like entitled Rango above struggling to get to the beach. No interest in low paid jobs. $100 an hour for trades is standard here. I have a bachelor degree and 35 year's experience and I do not get that. We live in strange times. Never been better on every metric but they still whinge. Life is good folks look on the bright side.
hilly
hilly
WA
8120 posts
WA, 8120 posts
9 May 2026 12:55pm
BWalnut said..
Got to try the 3.4 for a few hours today. Really good parawing. Trying to put together some notes on it. Any specific questions people have on it at the moment?


Back to back with PR V2?
hilly
hilly
WA
8120 posts
WA, 8120 posts
9 May 2026 6:40am


Mine is bang in the middle
hilly
hilly
WA
8120 posts
WA, 8120 posts
8 May 2026 10:49pm
marco said..


Big one - the positioning of the foil track is bananas. It feels like they never updated the location of the tracks when they scaled the model size, as the rail starts at the mid point of the rear strap, and then continues to the middle of the board, about a hand-width behind the front strap. So the only place it works for me riding Armie gear is wedged as far back as it can possibly go, and then its juuuust on the cusp of workable. If I was wearing straps, I am not sure this would be doable. As it stands I can't get the foil far enough back to be able to put my foot against the rear ridge (which would be the ideal, so you can pump up with foot pressing against that and then bring forward a smidge as you start downwinding). I would definitely recommend trialing this before you commit, as it may not work at all with your foil setup if your foot needs to be forward of the mast and/or you ride with straps. Might not be an issue with the larger sizes I suspect.



A pitty the mastrack is still an issue. I used ride SMIK boards but with Armie gear - mastrack to far back.


They are saying the other way around
hilly
hilly
WA
8120 posts
WA, 8120 posts
7 May 2026 11:01am
Great review

I have a 6 x 22 custom with a tint in the resin no paint issues. Tracks are fine have Flux mast in the middle and foot on back kick plus I like the grip. A 10 from me
Reply in Topic: Sup trench board??
hilly
hilly
WA
8120 posts
WA, 8120 posts
7 May 2026 8:57am
PJ87 said..
Hi Hilly,

What type of FD system are you using ?


I am not at the moment. Last one I had was the Gen 2 with max battery. If I did get one I think I would get the lightest one possible that has a decent run time with no efoiling. Still spoiled by using a super light board with jetski or boogie. But as I said before a stealth option is needed for busy days. Still looking at options.
Reply in Topic: Ozone pocket rocket v2
hilly
hilly
WA
8120 posts
WA, 8120 posts
7 May 2026 7:22am
pitbulldoug said..

hilly said..
Ordered a 4.3 and 5 to be my upwind/downwind tool. I do not downwind shuttle much and only in strong wind will keep the 2.5/3.5 Frigates for that as they pack down well. 5m PR in the backpack as security.

I hope they are as good as the reviews say. What I like the look of is the collapse in offshore winds I saw Dimitry doing on his vid.



surprised you got the 4.3 and a 5m as if my memory serves me rightly LOL,remember you are in the 100kgs crew like myself seems the 5.7 and 4.3 be good combo especially for backup if wind lulls out,4.3 and 5 so close together.I ordered 5.7/4.3/3.0 really like my 5.5m frigate though learned get along with a big PW pretty well


93kg now. Light wind PW doesn't interest me really. Tow boogie if swell and mtb if no swell are more fun imo.
hilly
hilly
WA
8120 posts
WA, 8120 posts
6 May 2026 6:59pm
Reply in Topic: Sup trench board??
hilly
hilly
WA
8120 posts
WA, 8120 posts
6 May 2026 7:25am
Smik Charger just released.
Reply in Topic: New Armstrong Masts
hilly
hilly
WA
8120 posts
WA, 8120 posts
5 May 2026 7:11pm
New connection too? No slop?
Reply in Topic: Ozone pocket rocket v2
hilly
hilly
WA
8120 posts
WA, 8120 posts
5 May 2026 7:03pm
Sheps said..

hilly said..
Ordered a 4.3 and 5 to be my upwind/downwind tool. I do not downwind shuttle much and only in strong wind will keep the 2.5/3.5 Frigates for that as they pack down well. 5m PR in the backpack as security.

I hope they are as good as the reviews say. What I like the look of is the collapse in offshore winds I saw Dimitry doing on his vid.



Ordered a 5m for the same reason Hilly. Will compliment my hybrids and dw specific Parawing's well I think.


Yep hybrids are high wind looking for the light wind upwind/downwind machine. Ptskin 5.4 was not quite it with upwind not good enough.
Reply in Topic: Ozone pocket rocket v2
hilly
hilly
WA
8120 posts
WA, 8120 posts
5 May 2026 2:24pm
Ordered a 4.3 and 5 to be my upwind/downwind tool. I do not downwind shuttle much and only in strong wind will keep the 2.5/3.5 Frigates for that as they pack down well. 5m PR in the backpack as security.

I hope they are as good as the reviews say. What I like the look of is the collapse in offshore winds I saw Dimitry doing on his vid.
Reply in Topic: Vintage foiling
hilly
hilly
WA
8120 posts
WA, 8120 posts
4 May 2026 10:56am
Microsurfer said..
Yeah I never quite worked out why they thought ski boots on the board were necessary?


Protect the ankles??

To match the rest of the ski gear he has on??
Reply in Topic: Ozone pocket rocket v2
hilly
hilly
WA
8120 posts
WA, 8120 posts
4 May 2026 10:35am
BWalnut said.. Here's the comparison chart and I wonder if the ranges here actually changed, or if they just tweaked and got more accurate? v1 on top and v2 on bottom.


Looks like they have adjusted their claims of wind range down with the bottom end the same. So less top end Seems at odds with the hype.
Reply in Topic: Vintage foiling
hilly
hilly
WA
8120 posts
WA, 8120 posts
3 May 2026 8:35pm



Reply in Topic: Ozone pocket rocket v2
hilly
hilly
WA
8120 posts
WA, 8120 posts
3 May 2026 12:01pm
Eppo is easily annoyed But he is right so many good ones coming out. Not sure why you would get the PP over PR V2 as the PR V2 ticks all the boxes if it lives up to the hype. Keen to try one.
Reply in Topic: Smik Pwing board
hilly
hilly
WA
8120 posts
WA, 8120 posts
2 May 2026 7:46pm
Loving mine still

I notice KT new design has a larger tail similar to the Jack. Helps get you up and going.
hilly
hilly
WA
8120 posts
WA, 8120 posts
1 May 2026 7:39pm
Reply in Topic: The Funny Images Thread
hilly
hilly
WA
8120 posts
WA, 8120 posts
28 Apr 2026 8:17pm



hilly
hilly
WA
8120 posts
WA, 8120 posts
26 Apr 2026 4:01pm
Mark _australia said..
It's ok I just took my lithium


Awesome I hope it helps
hilly
hilly
WA
8120 posts
WA, 8120 posts
26 Apr 2026 2:29pm
Mark _australia said..

hilly said.
Bipolar response






How so? All I said is Anzac Day isn't the place. When you said it's obviously only anti-woke One Nation types who hate the welcome to country I corrected you - you're wrong - and again I said 'but Anzac Day isn't the place to debate it by disruption


It was a joke about the different responses polar opposites.
Return To Classic site 😭
Or... let us know if a problem, so we can tweak! 😅