Select to expand quote
kitesem said..
Winging now for half a year and loving it. I'm on the 1010/460 Axis combo and with 90 kg my low end is now around 14 kts, with a 5 mtr Mantis. 6.2 is coming but deliveries are very slow in Holland. I'm looking for a low end wing for winging at sea with small waves. Around here it's hard to test axis wings so any info is welcome. Has the 1120 a better low end than the 1150, and is the turning better with as disadvantage a bit lower speed? I will accasionaly supfoil it so any info on that is also very welcome.
Kitesem like you said here your looking for "low end "wing the 1120 is what your looking for,however the 1060 with your weight at 90 kg might be a winner for you as I can get going on the 1060 easy on a 5m wing and 1060 in 13-14kts so you should be able to get going at cpl knots less with 6m and your weight the 1060 is just a great all around wing performs and behaves very well if you get some some good waves.Now if your bottom line is wanting max low end with a 6m wing look no further than the 1120 with 90kg you could really get down a few kts.So based on your OP no comparison with early lift bottom end with 1120 vs 1150 however once again with your weight if you could make the 1060 your low end choice as it's performance and speed are a obviously a step up from the 1120,but the 1120 is a great fun low end wing that I can ride at 100kg easily up to 20 kts plus no problem,especially paired with 420 or 380 rear.at 90 kegs your top end might be bit less.try the 1060 out no doubt especially with a 6m wing