Any rider feedback on the AK Durable Compact Wingboard - new dedicated wing board from AK Durable?

www.akdurablesupplyco.com/product/foils/compact-wingboard/

I was part of the Team involved with some of the testing of the prototypes and the final product. It's a no-fuss, clean design with the aim of minimising wetted area by not using deep concaves and channels etc. A lot of focus was spent on optimising the flattish rocker for early release and gentle touchdowns. Clinton Filen (the designer) basically started with an extremely flat entry rocker and increased it, prototype by prototype, until we felt we had soft easy touchdowns without pushing too much water when wanting to accelerate onto foil. Volume distribution is really good allowing you to remain in your riding position when not on foil and for easy re-starts.

I enjoyed the feeling of reduced swing weight compared to longer boards which makes pumping and turning more efficient.

Board is made in Cobra factory and is very very solid with an excellent thin, light, grippy deckpad. Part of the test regime is to never use a boardbag and just let it bounce around in the back of my van....no cracks or leaks so far.

Hi, considering the 58 litre 4'6. Lovely looking boards but I have armie foils, would the foil tracks be forward enough in the board for these foils? Cheers

Select to expand quote

PeterP said..
I was part of the Team involved with some of the testing of the prototypes and the final product. It's a no-fuss, clean design with the aim of minimising wetted area by not using deep concaves and channels etc. A lot of focus was spent on optimising the flattish rocker for early release and gentle touchdowns. Clinton Filen (the designer) basically started with an extremely flat entry rocker and increased it, prototype by prototype, until we felt we had soft easy touchdowns without pushing too much water when wanting to accelerate onto foil. Volume distribution is really good allowing you to remain in your riding position when not on foil and for easy re-starts.

I enjoyed the feeling of reduced swing weight compared to longer boards which makes pumping and turning more efficient.

Board is made in Cobra factory and is very very solid with an excellent thin, light, grippy deckpad. Part of the test regime is to never use a boardbag and just let it bounce around in the back of my van....no cracks or leaks so far.

Hey Peter, great info. Were you involved in the development of the Phazer as well, also a great looking board. Interested in any feedback you may have comparing the two. Thanks

Select to expand quote

t457118 said..
Hi, considering the 58 litre 4'6. Lovely looking boards but I have armie foils, would the foil tracks be forward enough in the board for these foils? Cheers

I have the same issue armie foils, each board I try the tracks are not forward enough

Select to expand quote

marco said..

t457118 said..
Hi, considering the 58 litre 4'6. Lovely looking boards but I have armie foils, would the foil tracks be forward enough in the board for these foils? Cheers

I have the same issue armie foils, each board I try the tracks are not forward enough

Would be nice to have a compatibility chart...somewhere...(perhaps a dedicated thread?)

Select to expand quote

t457118 said..
Hi, considering the 58 litre 4'6. Lovely looking boards but I have armie foils, would the foil tracks be forward enough in the board for these foils? Cheers

Far enough forward in the Phazer so should be sane on compact. If you are in Uk check out Swift foiling the NG is perfect for Armstrong