Will it be stiff and durable enough with ABS plastic or what is your experience?

Select to expand quote

oskarhhh said..
Will it be stiff and durable enough with ABS plastic or what is your experience?

I've done a bunch out of PLA and they are fine but a little brittle and may warp if it gets hot. Abs should be fine

PTEG

I did plenty of PLA ones ( initially because it was easier to print), current one being used for a year, 3 times a week in UAE (summer temp <> 40C / 104F) and no problem at all.
just make sure you print with lot of walls and top/bottom surfaces (end up with almost 100% infill)