hi there
I want to use single fin set up in my triwave 88, thinking about jp wave 26 and may be a freewave fin bigger for light wind. any suggestion please?

gab

I'll get a couple of MFC to try

26 is pretty big....

If for bump and jump / small wave conditions in light wind using a 5.7ish sized sail - for me at 83 kgs a 26 inch fin would be prefect for that board.

It is a 88L wave board. I use 26cm with a 5.7 on a 100L board
For that board, 24cm would see it.
26 is big and he is talking about even bigger for lighter wind.
If you need more fin than 26cm you need a bigger board too.

i am 85 kg, i think 26 cm will be good for me, any good fin? what would u recomend?

for wavesailing - MFC 2K 24cm

For B&J - MFC freewave 26 or similar upright almost freeridey shape

Try an Mufin Wave25cm.They have more then enough surface, heaps of lit and grip and are pretty fast. The outline look like an old slalomfin, but the turn like a wavefin, but they are a bit faster.

?c=2

thanks

Have a serious look at a C3 Vortex 23cm wave fin. I use this in my 95L FSW which is set up as a tri fin and use the 23cm C3 Vortex in single fin mode and it is awesome for high wind bump'n'jump and light/medium wind wave riding:
http://www.c3-fins.com/C3_windsurfer_fins/C3_windsurfing_fin_vortex.html

It is by far the best single fin I have used and I import K4 fins into NZ so I am more into twins, tris and quads - but for high wind bump'n'jump I am loving going back to a single fin again.