Back to top

Notsofreakin' expensive mast for Superheroes?

Created by DasM DasM  > 9 months ago, 11 Oct 2021
Register to post, see what you've read, and subscribe to topics.
DasM
DasM

15 posts

11 Oct 2021 7:14pm
Howdy,
I bought a line of 2020 Superheroes and can't afford the original masts so I'm looking at Gun Select RDM 100. It has the same characteristics according to the Unifiber conversion table. Someone that have tried this combo and can chip in their thoughts?
/Mats
Madge
Madge

NSW

471 posts

12 Oct 2021 8:23pm
I'd always use the right masts, thats what the sails were initially made around and they will never feel better than using the correct mast.

The Gun masts I've used are heavier than norths and won't feel anywhere near as responsive or rig the sails as well.

North masts are expensive for sure but you do get what you pay for.
sheddweller
sheddweller

278 posts

12 Oct 2021 8:55pm
Select to expand quote
Madge said..
I'd always use the right masts, thats what the sails were initially made around and they will never feel better than using the correct mast.




That is not necessarily true. Sometimes things like that are surprising.
Sea Lotus
Sea Lotus

320 posts

12 Oct 2021 9:24pm
You can check Maverx 70% from easysurfshop, they have some nice discounts from time to time, you get 20% vat reduction at prices if you are outside eu so don't forget to chose your country from top right when checking prices.
JakeNN
JakeNN

372 posts

12 Oct 2021 9:37pm
Peace of mind for performance with the same brand ..

www.duotonesports.com/windsurfing/hardware/masts/black50-series/
Roy
Roy

Roy

VIC

149 posts

13 Oct 2021 5:07pm
I also run 2020 Duotone Superheros, I have the frekin expensive Platinum Aero mast (bought on shop clearance) for the 4.7 & 5.3 but use an Ezzy 370 mast for the 4.2. The platinum aero is super light and responsive, but I think the sail looks better (less creases etc) on the Ezzy mast. If the curves match up then I think you will be OK with another brand....only issue is you will keep wondering if you would have been better on the Duotone mast.
TheTank
TheTank

124 posts

14 Oct 2021 4:37am
Not sure about the current Gun and Duotone masts but the 'older' ca. 2010 Gun and North masts had the exact same bend curve and where made in the same Italian factory. The only difference was the topsheet with the decals.

The current Duotone site mentions that Gun Sails masts are a good match with Duotone sails. So if budget is limited I would go with Gun masts.
HERE IS HOW GOOD OTHER BRAND SAILS WORK WITH OUR MASTS AND VICE VERSA:Challenger Sails, Ezzy, GA (2017 on), Goya, Gun Sails, KA Sails, Loft Sails, Naish Sails, NeilPryde (RDM masts), RRD, S2Maui, Sailloft, Sailworks, Severne (RDM masts, 2014 on)
>> 80-90% (depending on model and size)
robbo1111
robbo1111

NSW

649 posts

15 Oct 2021 9:26am
Looks like the new Duotone wavesails are going flextop - what a disaster for those wanting to mix and match between year models
elmo
elmo

WA

8879 posts

15 Oct 2021 2:54pm
Mentioned in this Wingsurfing tv episode @3.20
PhilUK
PhilUK

1107 posts

15 Oct 2021 3:32pm
I've not seen or heard more on the flex top masts since then. Were they teasing Ben about it for a giggle?
I think it would be dumb to start flex top masts for a line of sails in a brand, even if there was a small benefit. How many windsurfers would ditch their old masts just for this? There are people with more money than sense who think they must have the latest kit thinking it will improve their sailing but in reality not.
JakeNN
JakeNN

372 posts

15 Oct 2021 5:24pm
I'll buy the new stuff next season
swoosh
swoosh

QLD

1929 posts

15 Oct 2021 8:59pm
Duotone website has some info. www.duotonesports.com/windsurfing/sails/super-hero/

HERE IS HOW GOOD OTHER BRAND MASTS WORK WITH OUR SAILS AND VICE VERSA:
1. Challenger Sails, Ezzy, GA (2017 on), Goya, Gun Sails, KA Sails, Loft Sails, Naish Sails, NeilPryde (RDM masts), RRD, S2Maui, Sailloft, Sailworks, Severne (RDM masts, 2014 on)
>> 80-90% (depending on model and size)

2. Hot Sails, NeilPryde (SDM masts), Point7, Severne (SDM masts, 2014 on), Simmer Style, Chinook
>> 70-80% (depending on model and size)

3. Avanti, Gaastra (until 2016), Maui Sails, Severne (until 2013), Vandal
>> Not compatible
Faff
Faff

VIC

1394 posts

16 Oct 2021 10:17pm
Select to expand quote
swoosh said..
Duotone website has some info. www.duotonesports.com/windsurfing/sails/super-hero/

HERE IS HOW GOOD OTHER BRAND MASTS WORK WITH OUR SAILS AND VICE VERSA:
1. Challenger Sails, Ezzy, GA (2017 on), Goya, Gun Sails, KA Sails, Loft Sails, Naish Sails, NeilPryde (RDM masts), RRD, S2Maui, Sailloft, Sailworks, Severne (RDM masts, 2014 on)
>> 80-90% (depending on model and size)

2. Hot Sails, NeilPryde (SDM masts), Point7, Severne (SDM masts, 2014 on), Simmer Style, Chinook
>> 70-80% (depending on model and size)

3. Avanti, Gaastra (until 2016), Maui Sails, Severne (until 2013), Vandal
>> Not compatible


Avanti is CC (at least the RDM stuff). My 2019 Avantis rig perfectly on 2016/17 Severne masts.
JPBARNA
JPBARNA

216 posts

17 Oct 2021 6:11am
Select to expand quote
elmo said..
Mentioned in this Wingsurfing tv episode @3.20


When I get older I would want to be Ben
End of posts
Please Register, or first...
Topics Subscribe Reply

Return To Classic site