Yes it's great BUT what idiot decided to recess the nut for one of the pivot bolts into soft plastic so it just spins around when you try to undo it! If your lucky you can put a clamp over the plastic and squash it to stop it spinning but if that doesn't work your left with drilling it out. Very dump design when the easy solution is either not to fully resets the nut or better still use the same design bolt as they did on the other pivot where you can get a 5mm hex key in both ends.
i think I'm going to cut some of the plastic away before I put it back together so I can get a thin wrench onto the nut in future.