Back to top

DaKine contour footstraps

Created by decrepit decrepit  > 9 months ago, 8 Jan 2006
Register to post, see what you've read, and subscribe to topics.
decrepit
decrepit

WA

12802 posts

8 Jan 2006 7:43pm
John from seabreeze talked me into trying out these foot straps, I'm a bit of a tight a---, wouldn't normally spend that much for 3 straps, but it was Xmas money, so what the hell!
Tried them out the last 2 days. Fantastic!!! well worth the extra, super comfortable, great grip, but easy to get out of. Reasuring in the waves, no tendency for back foot to come out in jumps, even thou strap was loose for bottom turns.
Because of the contours, (cone shaped to fit your feet) they grip over the whole strap width, not just the front edge. They stay upright, and don't flop down, making them easy to get into.
Only possible disadvantage I can see, is ease of adjustment. That has to be done with a philips screwdriver, (undo the screws and change mounting holes in strap)
kitingkook
kitingkook

NSW

109 posts

11 Jan 2006 12:26pm
Best straps avaliable
sinker
sinker

WA

255 posts

11 Jan 2006 1:37pm
A timely post Decrepit.....

I got massive blisters last year off the footstraps on my acid, changed the straps to some old crappy ones and problem solved.

Only thing is I re-fitted the standard Starboard ones again when I was intending to sell the board .....didn't sell it ..... forgot about the horrible straps...limping around like a bas*ard after 2 big sessions recently.

How much are those straps?
decrepit
decrepit

WA

12802 posts

11 Jan 2006 9:02pm
Sorry, figures don't stay in my head very long these days, I think I payed $84, my wife thinks $89, for the set of 3.
one thing that fooled me, is the stainless steel plates, that fit between the plastic top caps and the strap. the plates were attached to the double screw caps, and I was using the single screw caps. Didn't work out that I had to remove the plates from the double caps and fit to the single, untill I had fitted all 3 straps. I overtightened the last screw, and blew the bottom out of the plastic, can't happen if the plate is there!
sinker
sinker

WA

255 posts

13 Jan 2006 2:02pm
clear as mud...

I'll work it out....Thanks mate
decrepit
decrepit

WA

12802 posts

13 Jan 2006 9:58pm
Didn't think I was making much sense, but it'll become clear as soon as you open the packet. Just make sure the stainless plates are under the plastic bits that you use, not the plastic bits left lying on the bench!

Think I'll have to get a job, talking in riddles.
rgeerdink
rgeerdink

NSW

34 posts

15 Jan 2006 8:31pm

When I first bought the DaKine contour footstraps I was really pleased with them. I bought a pair for each of my 2 boards. A year or so later I was very disappointed to find that they did not last very long. The plastic pieces crack and snap very easily and I have so far torn three of the 6 straps.

Has anyone experienced something similar?

Cheers,
Rob
decrepit
decrepit

WA

12802 posts

15 Jan 2006 9:17pm
That's interesting, hope mine last longer than that.
Do you have the stainless steel plates under the plastic pieces???

John said when he sold them to me, that he'd had one set last 3 boards, mind you, he didn't say how often he changed his boards.
rgeerdink
rgeerdink

NSW

34 posts

16 Jan 2006 8:12pm
No I do not remember the steel plates. Hopefully that does the trick. Please let me know how things work out with them as I would love to get another set if they no longer break.

Have fun on the water

Cheers,
Rob
decrepit
decrepit

WA

12802 posts

18 Jan 2006 9:16pm
I didn't notice them either, until I overtightened one of the screws and broke the plastic! Had a look at the double screw plastic bits to see if I could use that in some way, and low and behold, all the "doubles" had plates under them. Instructions doesn't mention them, so I suspect a few people who are just using a single screw, have made the same mistake.

So how long do you think it'll be before we know if this is the answer????
Perhaps you'd better remind me when you think the time's come, because I'm sure to forget!!!!!
elmo
elmo

WA

8879 posts

18 Jan 2006 9:42pm
try sending an email to Dakine, they'l probably respond fairly quickly with proper fitting instructions
decrepit
decrepit

WA

12802 posts

18 Jan 2006 10:08pm
What?? And spoil all the fun!!!
AUS154 Chris
AUS154 Chris

QLD

217 posts

19 Jan 2006 8:08am
The starboard racestraps are worth a go, though could be overkill on a wave board. Best stock straps I've found so far were the ones that came on my JP supercross. Very comfortable and durable.
JV
JV

JV

WA

65 posts

19 Jan 2006 3:14pm
wait until winter... the rubber is nice and comfy in the warm weather but goes really hard in the cold! Tears nice chunks out of your feet.
AUS154 Chris
AUS154 Chris

QLD

217 posts

19 Jan 2006 10:02pm
Which ones you talkin bout JV?
JV
JV

JV

WA

65 posts

21 Jan 2006 7:00pm
the dakine contour straps. I reckon I've got about 7-8 sets of them kicking around the shed somewhere... should go find 'em and give them to some of these crew that like them.
I found them fine when I was sailing in Maui a lot, but over here they kill me.
decrepit
decrepit

WA

12802 posts

21 Jan 2006 7:24pm
quote:
Originally posted by JV


I found them fine when I was sailing in Maui a lot, but over here they kill me.


So where's overhere??? Tassy I hope, but there again the board I've put them on is mainly a summer board, I'll try it in winter and see how they feel.
JV
JV

JV

WA

65 posts

23 Jan 2006 9:12am
Nah - I'm in Perth. And I reckon the winters here are actually pretty bloody cold!! None of my mates in the Europe seem to believe that, though...
End of posts
Please Register, or first...
Topics Subscribe Reply

Return To Classic site