Select to expand quote
SeaSkip said..
I was told hot rods are close to 13.5% bend curve, is that wrong?
Pretty sure that is correct.

The ones I tested went 13 to 14% as per specs.
I run my 2014 Koncepts on RDM's except the 7.5m on SDM
For the 2015's I have to use a mixture of SDM and RDM as I have some in-between sizes this years and don't have quite enough masts and bases. (hard to believe isn't it!

)
I run my 2014 4.2m, 4.6m, 5.0m on RDM's
2015 5.4m and 6.2m on RDM's and 5.8m and 6.6m on SDM's, but I might go to RDM with the 5.8m. Generally speaking the larger sizes (+6.2m) will work best on SDM's and smaller on RDM's but I have a 430 RDM that is slightly stiffer than the standard 21 (it's 24) and it works really well on the 6.2m and 6.6m.
The 2015 Koncepts have been better tolerance in the cam fit this year which means no need for cam spacers so far and nice clean luff set.
Also, if you are using RDM's, a suggest using the older type RDM cam rather than the newer one in the middle position as it is a bit easier to pop on when rigging.