Hi All

I am after some advice regarding my HT Race Extreme 13 fin which looks to be in poor shape. I don't know whether to attempt to restore it, or just leave it alone.



The leading edge looks and feels in good condition - uniform and there are no nicks.

The following edge has a few nicks in it. It also looks like it's been filed one side only.

The surface of the fin has pits and bubbles.

Any advice would be appreciated :)

Ja

Select to expand quote

sharkbiscuit said...

Hi All

I am after some advice regarding my HT Race Extreme 13 fin which looks to be in poor shape. I don't know whether to attempt to restore it, or just leave it alone.



The leading edge looks and feels in good condition - uniform and there are no nicks.

The following edge has a few nicks in it. It also looks like it's been filed one side only.

The surface of the fin has pits and bubbles.

Any advice would be appreciated :)

Ja

They were a very good tight course slalom fin back in their day. Still quite good in their sweet spot. Worth tidying up I would think.

Fine wet and dry on a block. Sand across the cord. Don't touch the leading edge.
For the trailing edge scratches use coarser paper on your block. This area is less critical.
Next spray with 3D filler paint (Spray can from Bunnings -black is good :-). Wet sand again with 600 and then 1000 until almost all filler paint is gone.

Polish to suit... or not... to your taste ;-)

Thanks Andrew. I'll give it a crack

Ja

Hmmm........ after careful analysis, i think i can safely say..... your carpet needs cleaning!!!


No seriously, pm me and i will give you the name of a local carpet cleaner

about the fin, why worry if your going to pack your gear away in a shed for the next 6 months!!

It's concrete dude :) Just outside the back door LOL :)

Woopsadaisy!! my bad!! Well i must say, you have clean concrete!!

ps, congrats!! 400 posts!! lucky bastard!!

pps, just give me the fin and you'll never see it again!