Back to top

how to mount the windsurfing rack to the van

Created by AUS 2459 AUS 2459  > 9 months ago, 2 Sep 2021
Register to post, see what you've read, and subscribe to topics.
AUS 2459
AUS 2459

WA

46 posts

2 Sep 2021 9:47am
just wondering if you guys have put bolts though the bottom of the van or if you guys just have it sitting on the bottom and have just made the rack to fit so it doesn't wobble or fall apart
LeeD
LeeD

3939 posts

2 Sep 2021 11:07am
I build the rack with a foot that braces against the front and one side of the cargo space, then use webbing straps to hold the other 2 sides.
Sandman1221
Sandman1221

2776 posts

3 Sep 2021 9:35am
made a platform in my Venza using angle iron frame that was sitting on the floor carpet on one end and wedged and contact cemented into the support for the removed rear seats on the other end. the weight of the equipment on top of it also helps to hold it in place.
John340
John340

QLD

3373 posts

3 Sep 2021 12:21pm
My frame is not bolted to the floor. I shaped the full width mid level plywood bench to the sides of the van so that its keyed in place.





RobJD
RobJD

VIC

18 posts

5 Sep 2021 12:01pm
I did racks with draws underneath - Didn't drill a single hole in the van, just used existing anchor points and a light (3 - 4mm) spectra lashing which is barely noticeable. Seabreeze won't let me post photos as I'm a "new member" - DM me if you'd like some pictures !
peterowensbabs
peterowensbabs

NSW

497 posts

6 Sep 2021 12:36am
Select to expand quote
AUS 2459 said..
just wondering if you guys have put bolts though the bottom of the van or if you guys just have it sitting on the bottom and have just made the rack to fit so it doesn't wobble or fall apart


In NSW putting a bolt through the floor in a hole that was not put in place by the manufacturer can void your insurance unless you get an engineering cert stating it mets the ADR (which is not as much hassle as you would think). Any even minor modification now has to be certfied.....red tape.
peterowensbabs
peterowensbabs

NSW

497 posts

6 Sep 2021 12:37am
Select to expand quote
AUS 2459 said..
just wondering if you guys have put bolts though the bottom of the van or if you guys just have it sitting on the bottom and have just made the rack to fit so it doesn't wobble or fall apart


In NSW putting a bolt through the floor in a hole that was not put in place by the manufacturer can void your insurance unless you get an engineering cert stating it mets the ADR (which is not as much hassle as you would think). Any even minor modification now has to be certfied.....red tape. Mind you, you need to be caught!
Carbonlover
Carbonlover

NSW

21 posts

7 Sep 2021 7:38pm
I racked my van with self tapping screws. Nothing through the floor, anchored in wall and roof with adjustable racks.
End of posts
Please Register, or first...
Topics Subscribe Reply

Return To Classic site