I have ended up with a Mistral One design built around 1996.
Haven,t had a decent board for the last 10 years so looking forward to getting out
I need to buy a new uni joint
Are these still available ?
If so can someone send me a link to a spares website
Many Thanks

Send a photo of what's broken. I'm in Townsville and may have spares or at least be able to point you to where you might get some!

Hi Snorkel
This is what I am chasing I could probably make something up if I had to but it would be good to grab the original item
Dave

Hi Snorkel. I need one too. Is the RS:X UJ/base the same size bottom pin?

If you cannot find the original one, you can screw any regular mast base just behind where you're plugging this joint.

the mast track looks like a shortened version of the Mistral Equipe II/2 track
and the 2nd photo is a photo from my blog showing how I adjusted / made it work with a Mistral Equipe I track
joewindsurfer.blogspot.com/2013/09/mistral-equipe-i-lcs-xr-and-fanatic.html

I had to do the same thing with the Mistral Competition SST as well i.e. with the metal plate
works well !!!

Many thanks for the photo I had not even considered that I could use that location

i use the same joints in my race boards, you can remove the pins and buy just the rubber.from andy at windsurfing gear.com i also live in townsville so if you need help pm me

Thanks all I have ordered a new joint pulled the mast track out now I just have to put it all back together
See if I remember how to Windsurf
Dave

Looking at the piccie I don't think I have anything to fit amongst my gear- sorry. The subsequent suggestions look very sensible. I have a mate who uses a normal mast base as a fixed base in an equipe using the track, so that should work.

See you out on the water here. It will be good to see another windsurfer out!!

Please let me know if you have any questions re sailing here!

Select to expand quote

joe windsurf said...
the mast track looks like a shortened version of the Mistral Equipe II/2 track
and the 2nd photo is a photo from my blog showing how I adjusted / made it work with a Mistral Equipe I track
joewindsurfer.blogspot.com/2013/09/mistral-equipe-i-lcs-xr-and-fanatic.html

I had to do the same thing with the Mistral Competition SST as well i.e. with the metal plate
works well !!!

I did use Google image

How are you finding your Mistral, I am looking at something similar ?