Select to expand quote
Andy1712 said..
I bought the Ezzy due to its specific and detailed tuning needs, as I first rigged it the immediate curves and shape are impressive.
My mast is constant curve SDM, 460, with 75% top bend and 62% bottom.
Essentially, I have reefed it down to max = the black line - light wind - leach marker.
By Max I mean the padded bottom of the sail is where the rubber top of the base joint comes up to.
I used the black string for outhaul and I like the fact that the battens do not touch the mast.
The sail is mint; however, with this amount of tension applied can these things stretch a miniscule bit overtime?
My first ride in light wind was great - I was laughing out loud - so resetting the extension is not a big deal, yet they make them to be detailed in the tuning so I'm asking around.
If you arent using the Ezzy mast, then you cant rely on the printed specs. Your mast has a bend curve characteristic of 13. The Ezzy RDM 460 is 15, more flex top.
3-4cm extra downhaul sounds like too much to me. Just 1cm takes me from medium to maximum.
www.ezzy.com/masts/mast-overview/Top section % - bottom section % gives you the characteristic.
MAST CURVES 0-6 = Hard top7-9 = Hard Top/Constant Curve10-12 = Constant Curve13-15 =Constant Curve/Flex top16-18 = Flex Top19-21 = Flex Top/Super Flex Top22+ = Super Flex Top