hi all well paddled out today and sitting there and felt cool water on my leg looks down and on my previous sesion i had the board turn sideways on me and i landed on the rail with my upper arm (thought i had broken it to be honest ) and one of the side bites must have slashed me wetty .Its only a small cut but i want to get it fixed asap before it goes ballistic any advice ?

Select to expand quote

crispy1960 said..
hi all well paddled out today and sitting there and felt cool water on my leg looks down and on my previous sesion i had the board turn sideways on me and i landed on the rail with my upper arm (thought i had broken it to be honest ) and one of the side bites must have slashed me wetty .Its only a small cut but i want to get it fixed asap before it goes ballistic any advice ?

You can buy some stuff called Neo Rez or Res it is very good but expensive

Select to expand quote

towball said..

crispy1960 said..
hi all well paddled out today and sitting there and felt cool water on my leg looks down and on my previous sesion i had the board turn sideways on me and i landed on the rail with my upper arm (thought i had broken it to be honest ) and one of the side bites must have slashed me wetty .Its only a small cut but i want to get it fixed asap before it goes ballistic any advice ?

You can buy some stuff called Neo Rez or Res it is very good but expensive

Neo Rez,Here: http://www.ebay.com.au/itm/WETSUIT-REPAIR-2OZ-From-NEO-REZ-New-Surfing-/252291418349?hash=item3abdbd88ed:g:u5UAAOSwHMJYJDe7

Iron on patches are reasonable too... You just need to use enough heat to make it get contact...

If you take care with cheap Denim Iron On Patches, and use the tip of the iron, you will probably be OK...
Foot Note: I haven't done this since my University Days in the 90's... When I had no real other option! ... These days, I just sniff around the Seconds Shops in Torquay Wettie Capital, and pick up bargains as required...

Select to expand quote

Simondo said..
Iron on patches are reasonable too... You just need to use enough heat to make it get contact...

If you take care with cheap Denim Iron On Patches, and use the tip of the iron, you will probably be OK...
Foot Note: I haven't done this since my University Days in the 90's... When I had no real other option! ... These days, I just sniff around the Seconds Shops in Torquay Wettie Capital, and pick up bargains as required...

Yep and use Neo Rez over the top I have used patches of material with Neo Rez top and bottom but hadn't thought of Iron on patches Bloody old grom man, a wealth of information

Hi guys well i searched the net then rang clark rubber and decided on some stuff called neoprene queen of ebay cost me 9.00 and its only a small tube but its only a small cut ,the guys at clark rubber wanted 20.00 and who knows when i would use it again as this is the first time i have ever had this happen in a lot of years thanks for the replies .

Not sure if this helps..

www.korduroy.tv/shows/surf-sufficient/repair-you-wetsuit-pt2-with-floss/

Well i had only a small repair but good info for a larger one that can of sealent would cost a heap as the one i bought cost me 8.00 heres a pic .