I'd just like to know where in Oz I can get my hands on a 101.

Has anyone got any in stock?

I borrowed one for this wing downwinder and it felt great but none for sale that I know of.

www.facebook.com/1080962406/posts/10217601159075735/?d=n

Select to expand quote

Downwinder said...
hahaha, love that burn Casso. I'll bet you a few schooners of beer next time our paths cross that you have a few cricket trophies.

Ha ha. We can have a "trophy off".

Little dw in French Carribean, feels good to be in warm water !!
Axis 101 flat stab, ultrashort fus and 75cm mast. Since this wing is "easy" to lift I will try with a 90cm mast when I go back home.

www.facebook.com/100009370249392/videos/2597817690540547/UzpfSTEwNDY3OTg2NTc6MTAyMTkyMTI0NDIzOTU2NzI/

Select to expand quote

tightlines said..
I'd just like to know where in Oz I can get my hands on a 101.

And I like to know where to get on a S1010 and a carbon mast in Europe...

And why is Axis not coming out with a bigger High Aspect wing?

The S1010 is only a little bigger than the S1000: 1430 /1430cm2 vs 1388/1310 (actual/projected surface)

The 101 is a very different shape to the 1000. It has a lot of concave on the underside trailing edge for lift. Having used both I'm not sure you need a bigger HA wing than the 101, unless you're over 95kg. For me the 1000 is still my go to wing downwind.
The surface areas don't really reflect the difference in lift produced by the shape of the two wings.

Select to expand quote

baldy123 said..
The 101 is a very different shape to the 1000. It has a lot of concave on the underside trailing edge for lift. Having used both I'm not sure you need a bigger HA wing than the 101, unless you're over 95kg. For me the 1000 is still my go to wing downwind.
The surface areas don't really reflect the difference in lift produced by the shape of the two wings.

I don't know how much you weigh but with my 85 kg I can't get the S1000 up on a downwind, I need a decent wave..
How much do you weigh?

I would prefer to get the S1010 to give it a try but if it takes too long I am thinking of an Unifoil 250...

I just hope I will get used to the lack off stiffness compared to Axis

Select to expand quote

baldy123 said..
The 101 is a very different shape to the 1000. It has a lot of concave on the underside trailing edge for lift. Having used both I'm not sure you need a bigger HA wing than the 101, unless you're over 95kg. For me the 1000 is still my go to wing downwind.
The surface areas don't really reflect the difference in lift produced by the shape of the two wings.

Are you talking downwind with a paddle?

Select to expand quote

tightlines said..

baldy123 said..
The 101 is a very different shape to the 1000. It has a lot of concave on the underside trailing edge for lift. Having used both I'm not sure you need a bigger HA wing than the 101, unless you're over 95kg. For me the 1000 is still my go to wing downwind.
The surface areas don't really reflect the difference in lift produced by the shape of the two wings.

Are you talking downwind with a paddle?

Good question, I can only say that I was talking about downwind with a paddle, not a wing...

I've found the 1010 with 460 flat rear and ultra short fuselage popped up quicker at lower speeds and smaller ocean swell than the 1000 with a 370 rear. Like being on the 102 with more speed.

Has anyone tried the 101 for prone surfing? I'm hoping it would be great on really small days. It does look similar to the uni/signature 210

Select to expand quote

wicka said..
Has anyone tried the 101 for prone surfing? I'm hoping it would be great on really small days. It does look similar to the uni/signature 210

Yes I did, it feels definetly slower than the 900 but I had fun using it connecting x6 waves, you can stay up flying at lower speed and it turns good for a big HA wing.
I would say it might be good for bigger riders on small waves no use for light weight rider.

I don't know about the Sign 210, the 101 might be slower but easier to turn as it is not as flat.

Yes I did try on the prone and as Frenchfoiler said the 900 is a much better pick than the 1010 plus it's also faster . The 1010 was never designed to be the fastest wing on the market. It's specific purpose it to fill the gap between the 900 and 1020 , with easy low speed lift (easy to start ) much slower stall speed so you actually stay up on the foil longer at lower speeds & handles higher top end speed compared to the 1020. The Signature 210 is a faster wing but it's much harder to start . There is a trade off for everything .

Getting back to the original question on the thread " Where can I buy one "'My mate nick named Axis "Chasing Rainbows " because you can never find the end of it to buy a 900, 100 1010 , 460 flat stab & now the new Anhederal (down turned ) 395 stab which is really sick BTW plus the new Carbon mast .

Select to expand quote

Camarillo said..

tightlines said..
I'd just like to know where in Oz I can get my hands on a 101.

And I like to know where to get on a S1010 and a carbon mast in Europe...

And why is Axis not coming out with a bigger High Aspect wing?

The S1010 is only a little bigger than the S1000: 1430 /1430cm2 vs 1388/1310 (actual/projected surface)

www.surfpistols.fr/fr_FR/axis-foils/surf-sup-foils/ailes-avant-carbone-axis-foils/aile-avant-carbone-axis-foils-1010mm-1430-cm

Indisponible actuellement

"Currently Unavailable "

another rainbow

Thanks guys exactly wanted to hear. The 900 is currently my go to wing with the ultra short fuse and 400 tail. I was hoping to find that wing for when it's really small and the 900 stalls at lower speed. And to help me with progressing to connect up multiple waves. Sounds like the 101 is exactly what I'm after.
now just the issue of tracking one down as you guys say! Haha

Select to expand quote

Piros said..
Indisponible actuellement

"Currently Unavailable "

another rainbow

Didn't check that.

Select to expand quote

Piros said..
Indisponible actuellement

"Currently Unavailable "

another rainbow

The Corona Virus is not helping...