Careful with posting photos like that Don. You might get a sudden influx of boating people and cause a local real estate boom.
We ended up going for a sail for a couple of hours
No a lot of wind but enough to keep us moving at 2 to 4 knots for most of the time
All in all a really relaxing time
Regards Don
Select to expand quotecisco said..
Careful with posting photos like that Don. You might get a sudden influx of boating people and cause a local real estate boom.
Hi Cisco
I don't know why more people from the mainland don't move here
We are originally from Cairns, spent 10 years working our way around Australia in our van so we have seen pretty much all of Australia and finally settled in this pace and love it
The real estate is dirt cheap compared to mainland prices and it is a beautiful place to live
Regards Don
Made it to beauty point on the tamar, Tasmania! Really awesome trip so far!
Got hit a couple of nights ago on my way to tamar by a massive weather system. 40+knt winds and massive seas, hove to for 6 hours in the dark, pinned against the coast continually beating into it between hoving to. Waves broke over and against boat. The clansman is a tough son of a bitch.
Maybe I'll cruise down the river to lonny tomorrow, not much going down at beauty point.
WSelect to expand quoteSirJman said..
Made it to beauty point on the tamar, Tasmania! Really awesome trip so far!
Got hit a couple of nights ago on my way to tamar by a massive weather system. 40+knt winds and massive seas, hove to for 6 hours in the dark, pinned against the coast continually beating into it between hoving to. Waves broke over and against boat. The clansman is a tough son of a bitch.
Maybe I'll cruise down the river to lonny tomorrow, not much going down at beauty point.
Well done and welcome to Tassie
Looking at the forcast it looks like there is a bit of breeze happening for the next couple of days
If you end up down this way let me know
Regards Don
Select to expand quoteSirJman said..
Made it to beauty point on the tamar, Tasmania! Really awesome trip so far!
Got hit a couple of nights ago on my way to tamar by a massive weather system. 40+knt winds and massive seas, hove to for 6 hours in the dark, pinned against the coast continually beating into it between hoving to. Waves broke over and against boat. The clansman is a tough son of a bitch.
Maybe I'll cruise down the river to lonny tomorrow, not much going down at beauty point.
There used to be some party animals in George Town Sir J Man 
Those Clansman were built for Bass Straight bloody good old boat Sir J man
Turned the boat so I could work on the starboard side ( didn't want to fall in )
Glassed in my starboard side today and filled the port side ready for some sanding tomorrow. Ill also fill in the starboard side with epoxy and Q cel filler tomorrow
I sort of feel I'm over the hump tonight
Ill grind it back tomorrow after a scrub of water to wash off any residual . Then fill with epoxy and Q cell the port side will be ready to sand the filler tomorrow .
I have Monday off as well so should have the cut outs completed on the out side except for a final fill and sand . I have been thinking of paying one of the painters at work to do the final fill and sand . He would be far better than I would be at it.
I have been thinking of laying full length mat right along the cabin sides after Ive ground the high spots off I have a few low spots I want to glass in yet before I do that.
Once I fill and sand the exterior the weather wont worry me so much 
< happy as
Select to expand quoteDonk107 said..
Well done HG
She is progressing nicely
Regards Don
Love the photos Donk Keep them coming.
I could easily run away with Lucy shes a sweet boat and a cute stern
Select to expand quoteHG02 said..Donk107 said..
Well done HG
She is progressing nicely
Regards Don
Love the photos Donk Keep them coming.
I could easily run away with Lucy shes a sweet boat and a cute stern
She certainly is pretty
Regards Don
Makes me wish I was a ship wright donk when I see a boat like that. Timber yachts keep well in Tassy not so much pollution and harsh sun
Select to expand quoteHG02 said..
Makes me wish I was a ship wright donk when I see a boat like that. Timber yachts keep well in Tassy not so much pollution and harsh sun
Hi HG
It wouldn't look like that if it was mine
I struggle to maintain my grp one 
Lucy is brand new at the moment but I think her owner builder will look after her well
Regards Don
Select to expand quoteDonk107 said..HG02 said..
Makes me wish I was a ship wright donk when I see a boat like that. Timber yachts keep well in Tassy not so much pollution and harsh sun
Hi HG
It wouldn't look like that if it was mine
I struggle to maintain my grp one
Lucy is brand new at the moment but I think her owner builder will look after her well
Regards Don
If she ever strays let me know Donk
Select to expand quotebrizzydave said..
How did you go with the mast step? I had no choice but to do a lot of work to mine and it is foam cored too.
Brizzy
I have a 300 mm square s/s plate with 10 mm holes The Ill modify still still thinking of choices with it yet but the external parameters are fine
The mast step might not be placed on top I'm thinking of fitting as a block base for halyards to the cockpit and the end result might be a U shape with the mast sitting inside of this s/s plate. I will be taking the boat down to sea ship wright before I do any thing . But wanted to make a base plate for halyard blocks so it will sit like this for a while yet
it may end up with the same principle some thing like this one. Ill wait till I get a ship wright to check it out
Ready to sand tomorrow .The Starboard is sanded down needs a little more filler in a couple of low spots.
Also ground down the internal cabin sides as Ill add a bit more mat in there tomorrow then its done till next weekend.
South Ace how long before I need to brush on some undercoat to protect the epoxy filler?
Got to love Tassie
Struggled for a breeze on Saturday and blowing 30 knots plus yesterday and today
Regards Don
Select to expand quoteHG02 said...
Ready to sand tomorrow .The Starboard is sanded down needs a little more filler in a couple of low spots.
Also ground down the internal cabin sides as Ill add a bit more mat in there tomorrow then its done till next weekend.
South Ace how long before I need to brush on some undercoat to protect the epoxy filler?
"Drift wood" the Online built boat!
Donk I sailed all through those waters in December 2009 I also completed a trip down to the bottom into Port Davey have you been down there ? Maybe I should post some tassie pics!
Hi Southace
I have not been there yet
The only sailing I have done down here is on the Derwent, the Channel and the Huon
I would love to see some pics of other areas down here
Regards Don
Select to expand quotesouthace said..HG02 said...
Ready to sand tomorrow .The Starboard is sanded down needs a little more filler in a couple of low spots.
Also ground down the internal cabin sides as Ill add a bit more mat in there tomorrow then its done till next weekend.
South Ace how long before I need to brush on some undercoat to protect the epoxy filler?
"Drift wood" the Online built boat!
Yer
Sanded down the star board side more to do yet.
Then started inside on the head and stove bulk head
The head compartment walls will, be cedar externally and white inside . Theres enough room for a sliding door running back towards the engine on the inside of the head compartment. I still have to work out the floor level in the head
Ive left enough room to move the doors across to the center of the opening.
Ill finish it off at the weekend and glass it in its held in with a few screws holding it off the hull
Im happy and many thanks for the input for my on line boat south ace and every one
My two small port light just arrived form Sydney.
Ill redice the width on the outer rings on all 6 port lights
Meant to add all these have fly wires . Which I like Ive been sailing a couple of times and slept on the boat and one of the girls on board got bitten over night ended up with a fat lip.
Now HGO2,
Whose lip?
Meant to add all these have fly wires . Which I like Ive been sailing a couple of times and slept on the boat and one of the girls on board got bitten over night ended up with a fat lip.
By the way, is the fly screen up to Queensland standard or that common down your way. If it an' Qld stuff the No-No's will get you!
Select to expand quotenswsailor said..
Now HGO2,
Whose lip?
Meant to add all these have fly wires . Which I like Ive been sailing a couple of times and slept on the boat and one of the girls on board got bitten over night ended up with a fat lip.
By the way, is the fly screen up to Queensland standard or that common down your way. If it an' Qld stuff the No-No's will get you!
Not sure NSW there made in UK ha Ha but the bite happened in north Queensland for a while I thought we might have to sail back to civilization asap fortunately she came good still had the fat lip but she stop complaining My sons girl friend
Select to expand quoteDonk107 said..
Slept on the mooring last night intending to go for a sail today but there is not much breeze at the moment
Here is 360 degrees of Port Huon while we wait to see if the breeze will happen
Regards Don
Select to expand quoteSirJman said..
Made it to beauty point on the tamar, Tasmania! Really awesome trip so far!
Got hit a couple of nights ago on my way to tamar by a massive weather system. 40+knt winds and massive seas, hove to for 6 hours in the dark, pinned against the coast continually beating into it between hoving to. Waves broke over and against boat. The clansman is a tough son of a bitch.
Maybe I'll cruise down the river to lonny tomorrow, not much going down at beauty point.
Hi There SirJman,
There is an opening day for the PDYC and TYC yacht clubs Sunday at Beauty Point, there will be a few yachts anchored up in Dark Hollow from Friday for the weekend if you are still about.
I hope be there Saturday but if you are going to be about let me know and I can help guide you up to Soldiers point if you haven't already been there.
Went for a jaunt out the heads last days off and as usual was a bit lumpy but managed to get a good pick of the lighthouse on the way back in.
Select to expand quote
Went for a jaunt out the heads last days off and as usual was a bit lumpy but managed to get a good pick of the lighthouse on the way back in.
That looks like it would have been a lively sail.
Wasn't too bad had 20 knots but sea's flattened out when offshore couple of miles, always kicks up around the mouth of the Tamar River.
Set a record today. In one biblical hour I dashed home, picked up generator and all my boat painting crap, drove to boat and set up gear on Jetty, sanded a square meter of scratched boot top prepped with jotun high build with orbital while standing thigh deep in muddy toadfishy water. Rolled n tipped with snow white toplac. Toplac....paint for dummies. Goes on like a spray job for us no talents. Wish it dried hard as two pack but. No paint on hands or mess anywhere. Packed up , got home without missus blowing up and made it to the pub for dinner with dust in hair. One hour...yey!!! Second coat tomorrow .
Wow, Dave. I have a boat you can work on some time.
Today I went up the new mast steps for the first time and tied cord between them to stop the halyards hanging up. Breeze kicked up just after we started so it was sometimes a tad lively for the first time. But glad to have gone up and I'm glad to be able to inspect everything and to be able to enjoy the view.
Select to expand quotebrizzydave said..
Set a record today. In one biblical hour I dashed home, picked up generator and all my boat painting crap, drove to boat and set up gear on Jetty, sanded a square meter of scratched boot top prepped with jotun high build with orbital while standing thigh deep in muddy toadfishy water. Rolled n tipped with snow white toplac. Toplac....paint for dummies. Goes on like a spray job for us no talents. Wish it dried hard as two pack but. No paint on hands or mess anywhere. Packed up , got home without missus blowing up and made it to the pub for dinner with dust in hair. One hour...yey!!! Second coat tomorrow .
ha ha your a legend
Not so much legend...more dodgy :-) lol.
Gawd that photo from up the mast looks scary.
