Back to top

Mould

Created by Bundeenabuoy Bundeenabuoy  > 9 months ago, 7 Sep 2021
Register to post, see what you've read, and subscribe to topics.
Bundeenabuoy
Bundeenabuoy

NSW

1239 posts

7 Sep 2021 9:02am
I had a good attack of mould over the winter period.
What work for cleaning it off? ie White vinegar , Eucalyptus oil?
Does Oil of Cloves keep it off.
Ventilation works but not always possible.
Have you had success with humidifiers or air purifiers?
Any answers would be appreciated
samsturdy
samsturdy

NSW

1659 posts

7 Sep 2021 9:11am
We use a mix of bleach in water, wipe it on with a cloth. Watch it though, if you make it strong whatever you spill it on will turn white.
There is probably 'Exit Mould ' in your local supermarket.
lydia
lydia

1927 posts

7 Sep 2021 8:15am
Magic eraser used with oil of cloves solution
dehumidifiers are a must have if you have power
Trek
Trek

NSW

1194 posts

7 Sep 2021 1:11pm
I use lemon Spray and Wipe, it smells nice afterwards too.
sunycoastguy
sunycoastguy

QLD

223 posts

8 Sep 2021 7:43pm
I installed a 100mm computer fan. Which is on all the time boat is left unattended. It reduces my mold by at lest 80%
And you dont get that musty smell when you first arrive.
Lazzz
Lazzz

NSW

910 posts

9 Sep 2021 7:49am
Select to expand quote
sunycoastguy said..
I installed a 100mm computer fan. Which is on all the time boat is left unattended. It reduces my mold by at lest 80%
And you dont get that musty smell when you first arrive.


Yep, I have 3 USB computer fans strategically placed, in conjunction with a couple solar vents, to keep the air circulating that run when I'm not on board.
No mould!!
Ramona
Ramona

NSW

7737 posts

9 Sep 2021 8:13am
I installed 5 Seabird ventilators. They are about $15 each. In a mainly flush deck I was surprised how much light they let in to the interior. I also removed the danbuoy tube from the transom leaving about 50cm of 150mm pvc tube. I placed some fish net over the inner end to keep birds out. So now I have air entering at the bow through the winch hawse pipe and the seabird vents that flows right through the boat and out the stern. If you have wood inside your boat you need air passing right through. The warm air off the engine in my boat passes out the hatch. In a yacht with the engine under the cockpit you need a vent high up on the stern. There will be no mould with a flow through ventilation system.
UncleBob
UncleBob

NSW

1301 posts

9 Sep 2021 7:40pm
^^^^^^^^^^^^
This, ventilate.
sydchris
sydchris

NSW

387 posts

10 Sep 2021 4:28pm
There's an article here that might be of interest. Not Aust products but it's a good review.

www.practical-sailor.com/boat-maintenance/getting-rid-of-mold-and-mildew-onboard

Also this one - I've used TSP with good success.

stingysailor.com/2017/02/11/remove-and-prevent-mildew-for-pennies/
End of posts
Please Register, or first...
Topics Subscribe Reply

Return To Classic site