Thinking of buying a new Naish with the quadrip canopy and I was wondering if it would be compatible with the new North clicker bar. I was thinking about putting them together but I will probably loose the loop and retrofit a fireball. What are your thoughts?

Summers looking good, ill be able to kite heaps better once I get all the gear, a game changer one might say!

Select to expand quote

I hope Eppo doesn't mind me quoting him...


<div class="forumPostText">"Couple of interesting points worth mulling over, I've picked up from reading Dans replies on KF.... <div>2. In the US the Click bar will retail for 690. If you can find a brand new bar for 230 I think that would be a great deal, however consider that the Click bar will give you Quad 22m and 24m bars in one package. For an extra $59 you can add a 5th line, which adds 5th Element 22 and 24, plus the ability to run the low "Y" means it will allow use like the Wakestyle bar. With the reversible pigtails the bar is then compatible with Naish, Cabrinha, pretty much any kite on the market that uses a single-frontline release. Yes the bar is not cheap, but I think it offers a lot for the price."

You're welcome

Select to expand quote

Gazuki said..

Thinking of buying a new Naish with the quadrip canopy and I was wondering if it would be compatible with the new North clicker bar. I was thinking about putting them together but I will probably loose the loop and retrofit a fireball. What are your thoughts?

Summers looking good, ill be able to kite heaps better once I get all the gear, a game changer one might say!

No use getting all that sh!t if ya can't keep ya harness on

www.seabreeze.com.au/forums/Kitesurfing/General/Dynabar-harness-failure/

Select to expand quote

Gilly3 said..

Gazuki said..

Thinking of buying a new Naish with the quadrip canopy and I was wondering if it would be compatible with the new North clicker bar. I was thinking about putting them together but I will probably loose the loop and retrofit a fireball. What are your thoughts?

Summers looking good, ill be able to kite heaps better once I get all the gear, a game changer one might say!

No use getting all that sh!t if ya can't keep ya harness on

www.seabreeze.com.au/forums/Kitesurfing/General/Dynabar-harness-failure/

Are you selling your CORE kite? In that case I need to avoid any "near-new" core kites on Buy & Sell.

One of our dealers that sells both north and naish has been doing exactly that.
Click bar with naish kite.

So stoked he took the setup to the Cocos with him.

What the buck... wouldn't a cloud bar or core/switch bar be better? why not go dynabar slider with nitros shorts
harness..or waist harness something like ride engine! That's
what my mate's set up is and it's super clean setup..
Game changer really!

Ps.. has loftys visa expired?

Select to expand quote

Gazuki said...

Thinking of buying a new Naish with the quadrip canopy and I was wondering if it would be compatible with the new North clicker bar. I was thinking about putting them together but I will probably loose the loop and retrofit a fireball. What are your thoughts?

Summers looking good, ill be able to kite heaps better once I get all the gear, a game changer one might say!

I wouldn't buy a naish kite unless they changed the octapussy fittings. They have troubles with those fittings and leak and are nothing like my ozone kites I have...

Yes it works no problems .rode the new pivot 2017.on the click bar a few times ...just undo the little clip to move the v in the centre lines all the way down to above the bar ...make sure you get all the twists out of the centre lines first as you cant undo them in flight

Select to expand quote

rhinoman said..
Yes it works no problems .rode the new pivot 2017.on the click bar a few times ...just undo the little clip to move the v in the centre lines all the way down to above the bar ...make sure you get all the twists out of the centre lines first as you cant undo them in flight

what do you mean with twist? I thought that the bar had BTB Swivel to untwist lines!

Select to expand quote

rhinoman said..
Yes it works no problems .rode the new pivot 2017.on the click bar a few times ...just undo the little clip to move the v in the centre lines all the way down to above the bar ...make sure you get all the twists out of the centre lines first as you cant undo them in flight

How was the Pivot 2017?