Hi everyone

After my much-better-than-expected DIY plywood light wind kiteboard I have now come up with a new project. I have a lot of wood left and I am itching to do something cool with it.

SO here is my idea. I want to make a directional board with some plywood. It is 12mm so I will have to do two layers for a big part of the board. I want to leave the nose as a single layer so I can put some rocker in it. I need some rocker to surf some waves.

I want to have something to surf waves with as it is hard to ride waves with a small TT. But here is the catch. I want to be able to use it(even if only barely) for paddle surfing as well.

I don't know what size exactly but reading through some posts on here and some surf forums I am leaning to something like 180cm x 60cm with either a square tail or a slight swallow tail. Is 180cm too much for a kiteboard? My DIY light wind board is 150cm x 50cm and I can ride it when the kite is struggling to stay in the air(very hard to launch it).

Would love to hear some suggestions from others. If someone has built one before please feel free to share advice, comments, lessons learnt and pics.

Thanks guys

Cheers
Mozzie

I love to hear the excitement about a DIY directional but I fear a surf board made of plywood will be just soo heavy.

After working on my project for two months it is finally finished. And I must say I am more than happy with the outcome. I took it for a test yesterday in some serious chop and cross onshore wind of about 23knots. Did awesome. The rocker is perfect and didnt nosedive when i went down the face of a wave.

So i would rate it 110% success. Performed much better than I expected.

Here are also some pics of the finished product and some of me testing it out. Lemme know whatcha guys think.

Cheers
Mozzie

MozKiter said..
After working on my project for two months it is finally finished. And I must say I am more than happy with the outcome. I took it for a test yesterday in some serious chop and cross onshore wind of about 23knots. Did awesome. The rocker is perfect and didnt nosedive when i went down the face of a wave.

So i would rate it 110% success. Performed much better than I expected.

Here are also some pics of the finished product and some of me testing it out. Lemme know whatcha guys think.

Cheers
Mozzie

... a few pics would be cool!!!!

Looking good man. Did you make the fins too? They look cool. It might be worthwhile rounding off the rails.

Thanks Plummet.

Yes I made the fins myself Plummet. Shaped them from plywood and glassed them on and screwed them in from the top as well.

It has very little bouyancy but that thing rocks that chop and that fish tail makes for some wicked tight turns.

Miser said..
disapointed

thought moz kiter was a little hungry village boy

hes just some rich white dude

Rich peeps don't make their own stuff

nød lærer en naken kvinne å sy

Miser said..
disapointed

thought moz kiter was a little hungry village boy

hes just some rich white dude

... you sir are a douche Miser,,,, contribute zero,,,,,, you sound or type just like that douchebag keyboard warrior RPM or also known as NoBS or who f knows now-a-days,,,,, just f off and enjoy some dudes achieving board nirvana!! Mozkiter,,,, full respect for going for it,,,,,, and f the rest of the deckheads!!! Love'n thy work!!!!

Thank you Rails, Puetz and Adam.

It is nice to hear some positive feedback.