I've just bought a second hand North 2013 10m rebel - kite only. A bit shocked when I saw I would be up for about $550 for new bar and lines to suit. Is there any way I can convert my Naish smart loop bar to suit? I need new lines anyway, but love the smart loop and would prefer to save the money too. I've never used a five line system before so not sure how it all hooks up. Cheers and thanks for your advice
Firstly , is your naish bar a 5 line bar? The rebel will not fly on 4 lines I know this I had a fifth line snap and the kite only just flew and was unridable. Other thing you need to check ,I think ? The naish 5 line bar ( such as the one for the torch ) the fifth line is not loaded ...meaning the line has a bungee type sheath over it to keep the line taught , the fifth line is not designed to carry load , the north rebel fifth line is on a stopper and actually holds load on the kite .
My advise is if you don't know what your doing ,get a north bar . I make up my own bar and line sets so can be done..
I've seen some wicked stacks from people messing with their bars and lines.
Both the North and Naish 5-line bars work similar to each other. A bit of a mixed answer from Andrew, the Torch is designed to ride with a loaded 5th line. Both line set up will have a stopper at the "Y" to set the length of the 5th line.
By the sounds of your comment, you don't have a 5 line (Shift) Bar. You can purchase a shift upgrade kit which will give you the front line assembly to make your bar 5 lines. If your back lines are in good condition, this saves you the expense of replacing all lines, however, I do recommend changing all line at once.