WA
44 posts
Currently riding a 2012 Lithium, I have been noticing lately that the small ball located within the inflate valve does not properly seat when I disconnect the pump, causing the air to be released. Can anyone suggest how this can be resolved? Thanks
QLD
2070 posts
On my Waves, after inflation I give the hose a good flick when disconnecting which seems to seat the ball most times.
On a side note, I've found that putting your inflation hose over the valve rather than inside will inflate your kite almost as quickly as the high volume valves that are around these days.
WA
8407 posts
the long pvc nozzle on your hose can push or displace the ball , cut it back a tad with a hacksaw and lightly sand to remove sharp edges, worked a treat on my old wipika valves
