Have any of you had experience with silver chloride electrodes for determining the correct amount of anodes you should have on your boat. I have ordered one of the silver chloride electrodes and will be going down this path shortly. It would be good to hear of other peoples experience with them.

I have heard of people not having any fixed anodes on their boat and when they anchor somewhere or go into a marina, they get out the meter and electrode and just dangle anodes on a wire (the wire needs to be connected the the boats bonding network) over the side until they get the correct voltage reading on the meter.

The table below is only a guide as I have also read that the desired voltage readings for glass and aluminium boats falls into a slightly different bracket.