Hi All. Need some information on a fin for a kids Sea Skip Board. The Fin length is 26cm and the top is 9mm wide and 20mm deep. Has a metal bracket (front edge) that holds it in the box and it can slide forward and back. (2 plastic pins on the back edge hold it in the box). Any ideas what replacement I could use?

It is just a US box fin any US box fin of a similar size will do the trick.

Yes that would work.

Hi Snoopy, not sure where you are located but if you have access to regular surfboard shops that stock longboard bits n bobs you would most likely pick up an inexpensive or a second hand long board fin of about that size for not much coin. As stated its a US box style but many surf shops would not know that name they would just refer to it as a regular fin box.

I'm looking to adapt a power box fin to US and am trying to locate for sale the metal bkt the same as your broken front fixing on the fin photo any idea where to buy one ?

Select to expand quote

peterowensbabs said..
Hi Snoopy, not sure where you are located but if you have access to regular surfboard shops that stock longboard bits n bobs you would most likely pick up an inexpensive or a second hand long board fin of about that size for not much coin. As stated its a US box style but many surf shops would not know that name they would just refer to it as a regular fin box.

Thanks peter. I hoped that would be the case. Didnt think the longboards were screwed in the same way. Apparently that metal bracket was sold as a repair piece to fit to the fin after the original plastic part was broken.

Select to expand quote

nerdycross said..
I'm looking to adapt a power box fin to US and am trying to locate for sale the metal bkt the same as your broken front fixing on the fin photo any idea where to buy one ?

Hi nerdy. Id give you the one I have but Im going to try and refix as a backup fin even if we replace it with new. There are no markings on it as to a manufacturer. If I find out Ill let you know.

Select to expand quote

Snoopy165 said..

nerdycross said..
I'm looking to adapt a power box fin to US and am trying to locate for sale the metal bkt the same as your broken front fixing on the fin photo any idea where to buy one ?

Hi nerdy. Id give you the one I have but Im going to try and refix as a backup fin even if we replace it with new. There are no markings on it as to a manufacturer. If I find out Ill let you know.

That be good Snoopy I was not begging just happy to buy if any one out there sells them.
I'm goin convert a slalom fin for my Kode 103 to push the blasting potential to it's limit (kode is US box.)

Just found a couple of fins and mast base from my old sea skip.
Let me know if you want them.

Select to expand quote

dantren said..
Just found a couple of fins and mast base from my old sea skip.
Let me know if you want them.

Hi dantren. That would be great. Let me know how much

Dunno mate.
If you want to pick them up, just bring $20.