Wanted:Mistral IMCO One Design Mast 495 cm IMCS 30-Flex Top Carbon Content 60%

I am getting some 7.4 m2 Mistral IMCO One Design Sails shortly but need a mast to match.

If anyone has got the one pictured below they don't want or know where one is available or otherwise can suggest a suitable match I would be most grateful. I am prepared to pay for the item. I have posted in the wanted section for it as well. Thanks.

Here is a Mistral 7.4 m2 IMCO Sail powering a Starboard Phantom in a high wind race at the 2016 Raceboard Worlds held in Queensland.

if it is flex top - why not NP or other 490 and maybe better than 60 % ??
i have a 490 with 75% and find it just as good as 99% carbon
not on that sail tho ...

Select to expand quote

joe windsurf said..
if it is flex top - why not NP or other 490 and maybe better than 60 % ??
i have a 490 with 75% and find it just as good as 99% carbon
not on that sail tho ...

It might be but it might not and I would rather not speculate. The mast above is made in Finland probably at the Exel factory. Someone on seabreeze might know about compatible masts specifically the Mistral 495 circa 2004.

I have an older one you can have. Same bend, carbon.
any more spare Imco 7.4 sails?

I have a mast like you're after. Not, I'm afraid, one that I want to sell. However if you can get yourself to Avalon, Sydney, you're welcome to rig up and trial sail your IMCO 7.4 with it as a point of comparison for an alternative stick.

Note: I'm out of the country until late November so after that.