My van is always fully loaded with everything I need I never remove or rinse gear -
I just put it on, wet and stanky
Check Surf Cams
Check video on computer, from last session (sometimes they simply disappear overnight)

if footage is still in iMovie:
I turn on cams and format all SD cards
All 3 cams are on chargers overnight (still cam, Kook Hat Cam and SoloShot)
Grab all cams, and associated gear
I pretty much always know where the wind and swell will be best from cam checks.
Drive to todays spot (could be 5 minutes or 2.5 hours)
Grab the board that you need footage of.
Set up Soloshot - 20 minute process
Turn on TAG, check for satellite connection
Put dishwasher spot remover on Kook Hat Cam - rinse in salt water
Put on Kook Hat
Calibrate Soloshot
Put TAG in armband and check if SoloShot is following (iffy)
Look up to find wind has switched or the tide got too high while I was dicking around with the cameras.

I never stretch or anything. the cameras take forever to set up
Go surfing - thats the easy part.
Turn Kook Hat Cam on before every ride
Check SoloShot to see if it is tracking
Sessions over.. go in, shut down SoloShot and pack it up
Take off Kook Hat Cam
Go home, Download video from all cameras
Put all cameras on chargers
Eat lunch, pass out
Wake up check video to see if SoloShot followed me or if Kook Hat Cam is all water spots
Go through 3 hours of video, scanning for useful footage
Pass out several times in the process
Realize you got nothing worthy of a video.
Go for a bike ride