Back to top

Cockpit sole mat

Created by Donk107 Donk107  > 9 months ago, 23 Mar 2017
Register to post, see what you've read, and subscribe to topics.
Donk107
Donk107

TAS

2446 posts

23 Mar 2017 8:51pm
Hi all

The cockpit mat is falling apart and i am going to replace it tomorrow

Thinking of going with the same Vynalite tube mat www.brierleyhose.com.au/matting.html but is anyone using something else that may be a better alternative

Any thoughts would be appreciated

Regards Don




sunycoastguy
sunycoastguy

QLD

223 posts

23 Mar 2017 9:16pm
I have the ribbed marine carpet lasted years in cockpit and feels good when im barefooted
HG02
HG02

VIC

5814 posts

23 Mar 2017 10:25pm
I was looking at some stuff in K mart and Bunnings a days or so ago
slammin
slammin

QLD

998 posts

24 Mar 2017 5:47am
I have the vynalite, the problem with it is that it feels good , doesn't get hot, drops dirt through the mat stopping it entering the cabin but over 20 years it ages and loses some colour and still works as if it's new so that you don't need to replace it for any reason other than cosmetic. I'd like a shinier new mat but can't justify it.
rumblefish
rumblefish

TAS

824 posts

24 Mar 2017 8:04am
Vinylite is much better than standard tube mate, it's grippier, lasts longer and doesn't get stuff up the tubes!!

Hobart branch is showing black, blue, red and grey @ 915mm wide in stock. We actually call it Flexirib in our system, normally $82.76 p/m, tell them Ben said to give you 20% off!!!
Bruski068
Bruski068

VIC

457 posts

24 Mar 2017 9:08am
OTB suggestion, how about some nice fake turf instead
sirgallivant
sirgallivant

NSW

1531 posts

24 Mar 2017 9:44am
I had some of that in my cockpit for a short time but l hated it and chucked it on the heap.
It collected all the craps underneath, scratching and marking the floor something shocking, it was always moist and slipped within the cockpit under load.
No more mats for me ever again.


I still got some in the head, thou.
l got the piece, still, it is 620*1020mm, free to a good home!

Donk107
Donk107

TAS

2446 posts

25 Mar 2017 7:36am
Hi all

Ended up with the Flexi-rib (thanks Rumblefish) and very happy with it

Regards Don




Moppo
Moppo

42 posts

25 Mar 2017 8:30am
I need to replace mine but don't know what to use as it is a steel floor and it mustn't be allowed to trap water for obvious reasons
Is there anyone out there using something on a steel cockpit floor
Donk107
Donk107

TAS

2446 posts

25 Mar 2017 11:58am
Hi Moppo

The flexi-rib may be ok because the cross pieces that sit on the floor have drainage grooves in them

Regards Don


sirgallivant
sirgallivant

NSW

1531 posts

25 Mar 2017 1:32pm
Could you please enlighten me about cockpit floor mats.

Y one needs a mat in the cockpit?

(it is an entirely acceptable reason if the skipper is female and the mat starts with a capital M! )


Donk107
Donk107

TAS

2446 posts

25 Mar 2017 7:12pm
Select to expand quote
sirgallivant said..
Could you please enlighten me about cockpit floor mats.

Y one needs a mat in the cockpit?

(it is an entirely acceptable reason if the skipper is female and the mat starts with a capital M! )



Hi Sirgallivant

Than is a good question

Not really sure why i need one other than there was one in the boat when i bought it a couple of years ago and it looks nicer than plain fibreglass

Regards Don
rumblefish
rumblefish

TAS

824 posts

27 Mar 2017 7:40am
A few good reasons,

- grip, old cockpit soles can get slippery
- protection, from droppong winch handles and damaging the floor
- clean, helps dirt drop through off shoes and then you don't step in the dirt when about to climb down stairs, especially if its a bit wet
Bruski068
Bruski068

VIC

457 posts

27 Mar 2017 9:33am
also it feels better underfoot than the bare deck in my opinion, not as firm
kimtrang
kimtrang

55 posts

27 Mar 2017 11:48am
Is there somewhere in Australia where teak mouldings can be bought to make a grate for the cockpit? Looking at some old pictures, my boat used to have them, but they're gone.
UncleBob
UncleBob

NSW

1301 posts

27 Mar 2017 3:24pm
Select to expand quote
kimtrang said..
Is there somewhere in Australia where teak mouldings can be bought to make a grate for the cockpit? Looking at some old pictures, my boat used to have them, but they're gone.


Hi almost any specialist timber yard will stock teak, but be prepared for price shock.
sirgallivant
sirgallivant

NSW

1531 posts

27 Mar 2017 5:10pm
Anagote timber in marrickville.

End of posts
Please Register, or first...
Topics Subscribe Reply

Return To Classic site