No sorry . But how long did it take to get here
Ive got a couple of things to order off them soon

5 to 7 days!

What at do you need a diesel heater perhaps?

Anyway I'm very happy with the German engineering tomorrow I will complete the other side and then pull it all apart ready for stain and gloss finish.

just use this....www.babelfish.com/ will translate any language

I'm not that worried about translation.....find it funny the Germans refuse to translate when dealing in English.

What you think H02 strip it back with paint stripper , stain it red. Top coat her with wattle espotol?

I think so South Ace only other alternative might be a veneer of your choice vac bag it maybe . if you want to go High teck carbon fiber




just throwing a few things at you S.A

Select to expand quote

southace said..
What you think H02 strip it back with paint stripper , stain it red. Top coat her with wattle espotol?

maybe a bosch heat gun to strip it. I some times use CRC gasket stripper as a paint remover at work.
I could send you some Tassy veneer I have . Houn pines gone but theres other nice veneers in the pile. Tiger eye for one lots of others I could get Ill check it out at the weekend and take some photos for you if you want

Sorry to intervene here between HG and yourself Southace, but the nasty paint strippers may bleach the timber somewhat.

Assuming it is veneered plywood or MDF there may be a better product out there-Hate the word 'Organic', but I can ask a contact on what he uses.

Would not like to see you getting stoned on caustic after a night out on the 'Pith'.

On reading German, can't do that. On speaking German 'Zwei Pils' work for us. That's 2 beers thanks!

I like bunnings paint stripper if they sold it at cheap as chips I would be into that too!

Thanks cool runnings I assume it's solid timber. I have used paint stripper many times never had a problem ....more problems sanding. Not so worried about the timber as im going to stain it cherry red! And I don't mind getting high. Regards

Select to expand quote

HG02 said..
I think so South Ace only other alternative might be a veneer of your choice vac bag it maybe . if you want to go High teck carbon fiber




just throwing a few things at you S.A

Great bar but that TV is just way to small for my eye sight!

Go knock yourself out Southace!

Been there and still doing that.

I can read and speak German, but Google translate does a reasonably good job too as does reverso.net.

Hi Southace. We did the same job on our Santana. Sanded it back then finished with a very fine steel wool. Applied seven coats of Goldspar satin.....perfect.
Staining is not a problem ...just don't mix it in with the varnish. Oh, and you must get all the old varnish off.

Whenever anyone brings up the topic of translations I just can't help thinking about this guy.

Select to expand quote

CoolRunnings said..
Go knock yourself out Southace!

Been there and still doing that.

I stripped one side and didn't get high. ! Bloody Bunnings water ther stuff down I think!

Those bare patches are they where the veneer is waring through ? South Ace

No it's solid! That was just the wet wipe down drying.

Something like this I think! Sheesh now that stuff is making me high! Should be able to complete the whole table tonight!

Good work Southace!

Colour change is a nice lift as well.

I am to place an order with Bunnings tomorrow-Can make a formal complaint on your behalf to ask for some more toxicity please.

I ended up using this product, it's a stain and a vanish all in one!

Still getting high on paints yeow!

starting to look good S.A.