Back to top

Would it be hard to convert Core Sensor 2s Pro bar into low Vee split?

Created by Swavek Swavek  > 9 months ago, 26 Oct 2018
Register to post, see what you've read, and subscribe to topics.
Swavek
Swavek

WA

396 posts

26 Oct 2018 11:42am
Atracted to ceramic bearing for untwisting lines, but high Vee
Splice my own lines , could make some bits of lines myself.
ActionSportsWA
ActionSportsWA

WA

1001 posts

26 Oct 2018 4:36pm
The whole core depower system is about 4.5m before the front lines start.
This makes it pretty difficult to change as you would need to not only create a differnt length depower/ power line set up (3 differnt liines of different length) but also adjust and create longer front lines.
Better off buying something that can already be adjusted like the North/Duotone click bar, covered centre line, internal mechanism, metered clicks, easy to adjust, set the split wherever you like and ceramic swivel.
Can always come in and grab a demo to try!

Toddy ASWA
Swavek
Swavek

WA

396 posts

26 Oct 2018 9:57pm
Thanks Toddy, never had a chance to have a close look at Core bar, sounds like a headache to try to convert to.low Vee.

Is the swivel on North as good as Core system? Using Wainman bar for all my kites - ceramic swivel but it does not work well after a year or so.
SaveTheWhales
SaveTheWhales

WA

1900 posts

29 Oct 2018 2:14am
Go the 60cm bar... I'll show you a little mod to make the centre lines last longer before you use it.
SaveTheWhales
SaveTheWhales

WA

1900 posts

29 Oct 2018 10:13am
Select to expand quote
SaveTheWhales said..
Go the 60cm bar... I'll show you a little mod to make the centre lines last longer before you use it.


The Depower lines I meant
End of posts
Please Register, or first...
Topics Subscribe Reply

Return To Classic site